Jump to content

Log in or register to remove this advert

Elmsdown Forestry

Member
 View Profile  See their activity

  • Posts

    237

  • Joined

  • Last visited

 Content Type 

Everything posted by Elmsdown Forestry

  1. Elmsdown Forestry
    I'm sure it will be the oregon oil as I said on another post it's been slated by 2 dealers one husky and one stihl. Apparently it's so crap you have to use it at 25:1. I've only ever used husky xp in all my new 560 576 372 395 and never had a pot piston problem. Trouble is husky will prob want to see the saw and oregon oil stains the internals and they won't repair under warranty unless you use a synthetic oil.
  2. Elmsdown Forestry
    A few dealers of both husky and stihl have said that they don't recommend any Oregon 2 stroke oils and I know husky won't do any engine repairs on saws that have used it within the year warranty period.I know of a few guys who use it and saws have seized and that was the response from stihl. I have always used xp oil on all autotune saw and never had and scoring or bearing issues. Apparently they can tell because the Oregon stains the internal parts red. This may have been your issue.
  3. Elmsdown Forestry
    390 will be to much saw for normal felling you will be better off with 576 that will easily run a 24inch bar and I know guys using 28 comfortably. I run my 576 on a 20 and it's fine, anything heavier is an occasional saw only for proper big fells. If your after a 576 I have one for sale if your interested.
  4. Elmsdown Forestry
    395xpg
  5. Elmsdown Forestry
    Hi all, Git above saw surplus to requirements 28 inch bar and chain. Barely used bought for oversize ash and oak fell. £600 plus postage. Also have 576xp at, 20inch Sugi bar and few av springs and a 560xp engine unit only no bar and chain. All well looked after and serviced saws. Will sell as job lot. If interested please pm me or 07595290954. Thanks.
  6. Elmsdown Forestry
    Where abouts in sussex are you
  7. Elmsdown Forestry
    Pm sent
  8. Elmsdown Forestry
    Hi rob What about 18inch 3/8 .058 for the 560xp in pro light.
  9. Elmsdown Forestry
    Hi. Am looking for a good haulier to move my forwarder got a couple of numbers but wondered if anyone here knows a reliable chap. Looking for moves around sussex and kent area. Thanks.
  10. Elmsdown Forestry
    It's common I've been through about 3 of those this year. It seems to happen when you don't use de comp whilst starting. Think they are about £10 to replace I did fleece my dealer for one under warranty. You can only ask to see there response.
  11. Elmsdown Forestry
    I can guarantee there is nothing wrong with my 560. As I said I've got 2 and all the guys who work for me have them and had minimal problems.
  12. Elmsdown Forestry
    I've had 372 560 and 576 and the 560 is by far the best all round saw. Light and bags of power. Unless I'm doing big oak or similar then a 70cc plus saw comes out. I run one 560 on 18inch 3/8 and it's definitely the preferred saw. I have another on 15 325 which is for sale. Check your pm.
  13. Elmsdown Forestry
    My dealer had had lots of problems with 372 xtorq won't idle right and revs don't drop on power off. I had a pre xtorq and was brilliant but when she died went to 576 and it's great. Will easily pull 28 bar and goes like a train. Will be interesting to see how it goes once I get it ported.
  14. Elmsdown Forestry
    My forwarder
  15. Elmsdown Forestry
    I've had a couple of the solid bars and they are great. Much better than the Oregon bars. Seem alot stronger and don't wear anything like other bars. Strongly recommend.
  16. Elmsdown Forestry
    Got the 576 and 560 and the 560 will out cut the 576. It's a much better setup,picks up quicker and cuts faster. Had the 576 crank go on mine replaced under warranty with new carb but reckon its needs help to increase pickup,it's brilliant in big wood but apart from that the 560 is the better saw. Watch out the for the main gasket going and chain oil pouring out of the 560, mine went last week had to get another whilst husky fix under warranty. There is a recall bulletin about it and heavy duty gasket being put in. They look really different on the 2011 and 2013 saws.
  17. Elmsdown Forestry
    Best bet shave all your hair of and use a antiseptic wash that gets rid of lice so that might work.
  18. Elmsdown Forestry
    Still looking for a tree feller currently in oak coppice near Canterbury nice size for saw logs and firewood. Ideally experienced but as before will spend the time training the right person. This will be a trial basis but could lead to a lot of work as currently have approx 2000 ton to cut and extract before feb. Please call 07595290954 Thanks nick
  19. Elmsdown Forestry
    Hi all Got the 576 had it a while and used to go like a train no matter what size wood I cut. Back in March crank snapped and got replaced by husky, no pick/revs went back to dealer and new carb replaced again by husky. Got it back and seems to be again slow on pickup and low revving, sent it back again and nothing can be done by dealer as autotune carb. This carb can't be plugged into computer for reset! Any ideas for improving had thought maybe exhaust mod.
  20. Elmsdown Forestry
    The work is currently in north Kent Canterbury area to clear up the location, and will be mainly sussex and Kent. Cheers nick.
  21. Elmsdown Forestry
    Depending on the size Douglas is high value timber last august it was 68 ton roadside and up to about 24 inch Scots even as shavings it's minimum of 21. Would check exact market value with the likes of tilhill or euroforest before making a decision.
  22. Elmsdown Forestry
    Looking for a hand cutter for mainly firewood felling in and around south east. Must have minimum cs30/31 tickets and own saw ppe and driving licence. Experience a benefit but adequate training will be given to right person, must be willing to travel and work within a gang of 4. This is a self employed basis. Call nick 07595290954 but reception is crap or pm me.
  23. Elmsdown Forestry
    Haven't yet will give them a try as they do my p/l and e/l anyway. Just wanted a heads up rather nan ringing round.
  24. Elmsdown Forestry
    Seeing as roadside is anywhere between 38-45 a ton work your prices around that and offer what you can! If the landowner/agent wants more walk away.
  25. Elmsdown Forestry
    Hi all, As per title looking to ensure a forwarder any suggestions on descent insurer that don't mug you off over cost and pay outs? Cheers nick

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept