muttley9050
-
Posts
2,688 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by muttley9050
-
Yes glass and solid wood back. Ash back is pine and yew back is oak as I didn't have pine thick enough. Also make my own turnbuttons out of oak. Thanks for all the nice remarks.
-
I've made several like the ash one before. Had all the jigs/templates already made. Reckon they take me about 2.5 hours each including finishing and cutting glass etc. Is like 40(ash)and 60(yew) for them, but that might be pushing it! But if I can sell a chopping board for 30 or 35 then maybe not.
-
Never really understood why people went badger baiting. Is it just for sport?
-
Two photo frames, 1 ash and 1 yew, made for the christmas markets. Just need to work out what to charge for them now?
-
Problem I find with that method is when retaining the original surround there just isn't much room. Also if you leave the register plate in(i couldn't get mine out without removing stove) then you get a build up of soot in top of plate that is a pita to clean. I just find that removing the stove makes life a lot easier and means you can do a better job. Other stoves in the house and my parents I sweep in the same way as you, but on mine it doesn't work for me.
-
The problem with fitting a stove like this is getting the external flue high enough. It should go above the ridge so unless you have a flat roof you need lots of bracketing to support flue which is expensive and ugly. If I was fitting it I would go through wall horizontally and then go up. You need stainless twin wall external flue. This is expensive. Problems can occur if you have a big overhang in your roof and you have to dog leg flue around it.
-
Fitted loads of stoves, its simple. Easiest way for me, forget the liner if you don't need one. If you want to leave your surround as is and burner will fit ok, just remove the cast fire and bricks behind it. Get a piece of 1.6mm galv, cut it 20mm bigger than opening. Fold steel 10mm down around all edges. This gives you a lip to screw through. Cut a hole for stove pipe in correct place in plate. Fit plate. Fire silicone round outside of it to seal. Put stove pipe through plate fit burner and seal round joint between plate and pipe. Job done. When it comes to sweeping, remove stove and plate, sweep and replace. Takes me about an hour on my similar set up. Your welcome to pm if you want more help. Would happily guide you through it on phone or send you lots of different set ups in our house where we have retained the original surround. Think we have around 30 burners in our place.
-
OIl based paint,paraffin wax, adhesives, All work to seal ends. If ive a really nice piece i paraffin wax it, but as this is harder, usually its the oil based paint.
-
Fair enough. just tried it now and worked fine, wouldnt work the other night. Rob only had alaskans in his ebay shop. Must have been a glitch,
-
Rob, I was having a nose on wood lots the other week, I saw an ad you had on there for your ebay wood, I followed it and no wood to be seen. Maybe this needs updating?
-
This is a good point, which one will still look good in a few years?
-
I have to agree with Rob here, get tree, mill, stack, wait, joint, plane, advertise, give 10% to ebay. I'm in the process of making a load of chopping boards at the moment as I had a paticularly good market last weekend and sold out. If I bought those boards is get six good size chopping boards which with a little sanding and oiling is be selling on for £120-150. I wouldn't pay that much for them but I have the ability to make my own and increase my profit. But this means I do all the work.
-
The more I read your posts the more I'm glad your miles away. Unessacary comments when only honest advice was sought.
-
Maybe you require a sense of humour hedge hunter! Gransfors axe is nice but i find it a little short. Fiskars for me.
-
I've done a couple of similar signs one was 60 and one was 70. Ians probably the man to ask though.
-
Top work on the sign mate, looks pretty perfect to me. Let me know how the router is when you have used it a few times please Ian. Thanks
-
Nice work mate, any pics pre carving, mid way?
-
Looks like he's trying to avoid ebay fees. -
Depends what tennancy is on the land and what you can prove its previously been used for. And if course what kind of business you want to run. Locals might object to excess noise or the onslaught of large wagons.
-
Stoves like this are super efficient use little wood and tackle the problems in caravans of little thermal mass. They can be constructed in wooden boxes so they are removeable if need be. Somebasic info can be found here rocket stove mass heater Try googling ernie and erica wisner, They know more about fires and efficient space heating with rocket stoves than you would ever guess
-
It's worth thinking about the thermal mass in the van and trying to increase it with something like black mountain thermal flex insulation. Or to be super efficient what about a rocket stove mass heater. Would be a good option if you could increase floor strength a little.
-
How old is trailer? I'd be more interested in more ceiling insulation and better windows/secondary glazing. If you want to insulate floor there's many ways to tackle it. Do you want to lift old floor or insulate over top of it. Some really good multifoil type carpet underlays available now. A radical idea would be spray foam on underside, depending how your services are running. Fitting a burner is easy. You can get any special bits you need from windy smithy.
-
What does it cost roughly for a crane like that + fitting? Thanks
-
If that partner had 3 seats, 4wd and loads more power and clearance, it would be perfect.
-
In a labdy the middle seat is useless, but in a transporter/expert its fine.
