Essexlogman

Line put and under are words that spring to mind move on and now you have got the hang of Google Adwords concentrate on that and march forward hope this helps!

No Traffic police would not get involved with that as Hetas have their own tactical support group for that

Yes my apologies those figures I quoted were Farenheight and your photo looks like it should be spot on

Just having a perusal of your initial enquiry this thread and the answers everything sounds about right apart from this section I Note you are always burning hot as you say at 200 degrees c I am assuming this is your flue temp if so this is nowhere near the sweet spot operating temperature you should be looking at Min 250 to 400 350 being the optimum temp our thermometer shows a max of 480, we aim to get between 300 to 350 for top performance from our newly fitted Parkray Hunter aspect 7 fitted burning bone dry Oak and Apple logs atm also single storey chimney height above the ridge height I can only speak from my own experiences and recommendations others may differ hope this may help someway

Had a similar reverse one like this with our old neighbours burning Laurel hedging totally covered our car with black smuts a total b****rd to clean off and had just cleaned that day they were fine about it and offered to pay for any damage but we declined as they were and are still such nice people!

Yea right!

I had this issue on an echo 360TES stopped oiling after a month or so from new could not believe it was the pump gone but took back to the supplier turns out it was a blocked gauze which was really fine in the oil tank line we were always carefull filling with chain oil BTW, found it hard to think it got blocked but never had any other issues after that hope this might help

Hello we ran one of these saws for a good few years from new it ran straight out of the box cracking saw after about six months we had something rattling about in the exhaust which was changed by the dealer and he balanced and set the carb up absolutely bang on totally reliable saw! As for your main question the L for lower speeds and H for the higher ones that does not sound right to me that the L affects WOT, this is all about balancing again am sure other people can enlighten you more on these intricacies Your saw you have just run it in which leads me to believe it is not that old your carbs needs balancing which is a fine art I don't think you need to be taking out the cat at this juncture I would take it back to the dealer and get them to set it up properly hope this helps

I concour that is one nasty chain! dust and bin are a couple of words that are springing to mind atm

Put all those old wives tales away about certain woods !! I got asked to top out and pollard some big lime tree's a few years ago for a mate in May ended up with a nice big trailer load I was a bit sceptical at first being a connossieur of the old Log so to speak but thought I would at least keep the old firepit stocked up cut and split straight away buy the end summer the top pile were burning great and within a year all fully seasoned only thing was a very distinct aroma not my most favourite I might add

Mastic shrub or Terpentine shrub pistacia terebinthus possibly, must get back to Morocco someday was a great experience travelling back in the early 80s

Have been here before I had one of those remote controllers as in your Vid they were fine and yours seems OK when working, but the main problem we had with intermitent working ( which is a real drag with a full load of chip at the end of the day) after changing the solenoid then battery was infact the battery terminal lead connectors and or the conections to the pump unit they can corrode up badly only found this by chance as they were sparking in dusk light, hope this helps

We used Andrew Day arb consultants was based in Southminster very affable and professional chap, hope this helps

Broad sword calling Danny Boy!!!