Jump to content

Log in or register to remove this advert

Al Cormack

Veteran Member
 View Profile  See their activity

  • Posts

    2,338

  • Joined

  • Last visited

 Content Type 

Everything posted by Al Cormack

  1. Al Cormack
    Looks like the khazi down our yard.....
  2. Al Cormack
    I wouldn't worry about letting it dry. Get some fresh fuel in it and get it going to lubricate everything.
  3. Al Cormack
    Should be ok then. Does as said above. [emoji1360]
  4. Al Cormack
    Was it running at the time?
  5. Al Cormack
    I seem to remember it was when the beast from the east was here. So settled down for a Sunday afternoon movie in front of the fire. This one does the central heating and hot water as well[emoji1360]
  6. Al Cormack
    What's not to like? [emoji1360][emoji1360]
  7. Al Cormack
    You've been busy down there Bob!
  8. Al Cormack
    I should think Space is probably where he ended up...
  9. Al Cormack
  10. Al Cormack
    I'll put a photo on later.
  11. Al Cormack
    Not had any wiring issues for over a year now with Sena. A small zip tie will hold the battery on. We have also removed the cover from the dial part. Doesn't get banged on branches now.[emoji1360]
  12. Al Cormack
    Cheers. Just remembered I've got some Timbrel somewhere, will have to find out what it works on as label has disappeared if I recall.
  13. Al Cormack
    In my polytunnel, where I store logs, keep getting grass and weeds growing up inside around the edges and in between the cages. What's best poison to spray them with to kill them off? Cheers
  14. Al Cormack
    Were you just splitting, or cutting as well? I've noticed the oil temp go up when just using it as a splitter.
  15. Al Cormack
    In front of the engine is a white plastic reservoir. Unscrew the top and see if any oil is in there. From my experience they don't need much so as long as you can see some it should work. Check the cable is moving the lever fully when you push it for forwards and backwards.
  16. Al Cormack
    James pepperpot has a Lucas mill as well
  17. Al Cormack
    I would have thought so. Did he give you the right saw?? [emoji12]
  18. Al Cormack
    I think the drive setup is hydrostatic and similar to Danequip grinder. There may be a small drive belt that is stretched or delaminating under the side cover? I would definitely consider changing to green teeth set up. So much easier than finger teeth.
  19. Al Cormack
    Don't use those horrible scotchlock connectors though. Solder and heat shrink [emoji1360]
  20. Al Cormack
    There will be a date stamp inside the helmet somewhere. I think most helmets are 5 years, petzl say 10 years, but I know some who change their helmets every 2-3 years. If it gets dropped or suffers an impact it should be binned...
  21. Al Cormack
    Arbtalk offer is £250 + vat.
  22. Al Cormack
    Cheers Steve.
  23. Al Cormack
    Is the yearly subscription per tracker? Or does the subscription cover mutilple trackers if more than one ordered?
  24. Al Cormack
    Here you go: https://www.lsengineers.co.uk/catalog/product/view/id/10595
  25. Al Cormack
    That's just you that talks funny Ken! Everyone else sounds like a South Westerner.[emoji23]

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.