Jump to content

Log in or register to remove this advert

Aspen v Motomix


john k
 Share

Recommended Posts

When I went into my local (Stihl) dealers to pick up half a dozen cans of Aspen they told me that they were now recommending Motomix instead as it is much more pure than Aspen. I reckon that's a load of guff and they are just pushing the Stihl product.

 

Anyone else one across this? As far as I know the two are as similar as makes no difference. God knows, Aspen is expensive enough and there's no chance of me paying even more for Stihl's branded version. I'd did get a free litre bottle to try though, so can't complain too much :)

Link to comment
Share on other sites

Log in or register to remove this advert

I have been trying to identify differences between Aspen and Motomix, which is a little difficult as Stihl are putting out very little information.

 

I have found no mention of Motomix being an Alkylate fuel, merely that it is made from premium 92 octane fuel with no ethanol.

This is to some extent backed up by the higher vapour pressure and lower flashpoint of Motomix, properties more in line with pump fuel than Alkylate (Aspen)

 

And, Motomix has an advertised shelf life of 2 years once opened, compared with the 3-5 years (temperature dependant) of Aspen.

 

The current Motomix safety data sheet shows the benzene levels at less than 0.5% compared with less than 0.1% for Aspen. (2% for pump fuel)

 

So far it does look like Aspen is the superior product.

 

If anyone can find out more info on the Motomix I will be keen to see it. Just remember that the pre 2014 Motomix is different to the current one.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.