Jump to content

Log in or register to remove this advert

Where can I get a hydraulic winch pump for a Land Rover?


William Clifford
 Share

Recommended Posts

Hi,

 

2001 Land Rover 130 with Hydraulic winch fitted. The winch appears to work when tested - pulling another vehicle up a slight incline for example, but lacks any real power when it comes to it. Winch was on the vehicle when purchased with no identifying marks etc. I've been advised that it is most likely the pump - pictured. Does anyone know where to be asking for one? It is constantly running - attached to the belt as seen in the picture so needs to fit / be like for like etc.

 

Thanks.

 

 

WhatsApp Image 2023-07-27 at 15.35.57 (1).jpeg

 

WhatsApp Image 2023-07-29 at 19.48.06.jpeg

Edited by William Clifford
Link to comment
Share on other sites

Log in or register to remove this advert

Does look like a Milemarker set up, not the most powerful set up IIRC, could put a PTO driven pump on instead that would pep it up. 

I think best bet is get the pressures checked, see what the pump is putting out.

 

 

  • Like 1
Link to comment
Share on other sites

Ok, I took it to my local agricultural mechanic who said that if it's on it's original pump, constantly running for 175K miles then it might be a little tired! He looked over everything else and said best place to start would be put a new pump on as everything else looked in order.

 

3 times it's let me down when I needed it. We'd then spend time checking it, test it with a load (eg empty 3.5T van pulled up a sloping drive) and it would seem to be working. Then when it comes to it it isn't up to the job. For example, bogged down in a field only tyre deep, not down to the axles, a load of logs on the low-sided tipper back, but it wouldn't pull it out. We only just got out with a bit of a back up and run and the combo of help from the winch. So I'm thinking there must be something wrong - it can't be that poor?

 

I'm afraid I don't know what winch it is. It was built as an arbtruck but I'm the 4th Arb owner and there's no markings on the winch.

 

So like for like could be tricky if it's an adapted merc power steering pump?

 

Is it much of a job to switch it to a PTO pump if I can't find a replacement or if we need more oomph?

 

Thanks!

Link to comment
Share on other sites

My old LR had a little PTO coming out the transfer box to the pump with a hydraulic tank under the drivers seat (ex utilities)

The winch was slow but epically strong.

I imagine it was very expensive to fit, it looks to me like someone came up with a much cheaper (and less effective) option.

BE321ECA-3DDD-44FF-B411-26585F554323.jpeg

Edited by Mick Dempsey
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.