Jump to content

Log in or register to remove this advert

Pulley for winching


Recommended Posts

Log in or register to remove this advert

1 hour ago, Ty Korrigan said:

This?

 


Made from zinc plated CNC precision cut carbon steel to ensure smooth...

 

 

I'd order it but Brexit means double vat, tariffs and handling on top of postage.

I could get a couple sent to a UK client though who could bring them them over.

 

   Stuart

 

Thats where ours came from, and what you state above thats what you have to pay for buying from the UK, Do you not know any drivers either coming to the UK or coming over to France from the UK ? 

Link to comment
Share on other sites

12 hours ago, spuddog0507 said:

Thats where ours came from, and what you state above thats what you have to pay for buying from the UK, Do you not know any drivers either coming to the UK or coming over to France from the UK ? 

The pulleys are shipping from Germany.

 

Link to comment
Share on other sites

I got a couple of Van Beest green pin snatch blocks made in Netherlands. They were cheap, €150 each some years ago, 6 or 7 maybe. Rated 4 tonne, but that's for lifting, x5 safety factor, so fail at 20 tonne. They came with built in shackles rated for 6 tonne. Two grease nipples, one of the shackle swivel and one for the bronze bushing. 10-12 mm groove. Each unit weighs 16kg... Massively heavy and strong things, for very reasonable money.

  • Like 1
Link to comment
Share on other sites

Give the diameter of the snatch block a bit of thought, there is a minimum recommended pulley diameter for a given rope size.

 


Snatch Block Sheave as used with Tirfor Cable Pullers - from 1000kg to 6400kg - Pulley Block Cable Pullers

 

 

Bob

Link to comment
Share on other sites

14 minutes ago, MattyF said:

Does any one know where I can get a block that drops the cable when the winches log comes in to contact with it ? I've seen them being used on the forum before I think it was slack my girdles post??

Treadlight sell them but you need the trigger block on the line too, this conical block rides the  rope off the groove.

 

I have the snatch block (only rated at 2 tonnes) but not the trigger as the sudden slack in the HMWPE rope causes problems with the wraps on the Eder capstan, so I slack off and dismount the rope, take up slack and start winching again.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.