Smaller saw to compliment 372XPG

[Lotto]

I cut for firewood only. Only fell dead trees or hung windblowns, allowed to take stuff already down, I live in a forest and have a 372XPG fitted with a 20" bar. I would like a smaller pro saw to do the limbing with. Should I fit a smaller bar to my saw or which model of smaller saw would you recommend? I'd like to stick with Husqvarna as I have a good local dealer and also continue to use 3/8 chain as I find it easier to sharpen. Most weekends the saw is in use for around 6 hours in total. 

[gary112]

550 xp or 560xp would be a good choice,but you already have one of the best Husky saws anyway with the 372

[Toad]

Maybe a 562, then you could swap bars and chains from the 372 if desired. Might overlap a bit too much though.

[Ferguson system]

I'd say go for a 50cc pro saw with a 13" or 15" bar. Lighter, less vibrations, better ergonomics, more than enough power. Use the 372 for the larger stuff.

[Mick Dempsey]

550.

[htb]

346

[TIMON]

346 if a good one is available or if not a 550.

[Stubby]

21 minutes ago, TIMON said:

346 if a good one is available or if not a 550.

This . If you go for a 550 get the MK2

[Rough Hewn]

Stihl 261.
14" bar with 3/8

[Ratman]

This . If you go for a 550 get the MK2

Oohhh..... ??? go on lad! [emoji51]