Jump to content

Log in or register to remove this advert

Hardest Wood to Split


Billhook
 Share

Recommended Posts

Hi all ,first post ? .

Lignum  is also used for bases \ bottom half of some fishing stick floats , it's heavy , I think it sinks .

As said  also for bearings ...

Anyone messed with ' moss stocks ' , ithink a local name , black wood dug out of mossland , pressumably bog oak , should be processed wen wet staight as dug , if it drys ..........

Link to comment
Share on other sites

Log in or register to remove this advert

Just discovered the Janka scale which reveals some surprising facts about different woods.  It measures the strength in terms of the force needed to break a certain size of timber in special press.  Australian Buloke is top of the list at 5000 ft lbs and Balsa at the bottom with some bits as low as 22 ft lbs

 

https://en.wikipedia.org/wiki/Janka_hardness_test

 

Hornbeam has a  Janka     of    1630 ft lbs and a crushing strength of 7320 lbs/sq inch

English Oak                                   1120                                                          6720

Apple                                              1730                                                          6030

Beech                                              1450                                                         8270

Elm                                                     810                                                         4740

Ash                                                  1480                                                          7400

Holm Oak                                        1610                                                          no data

 

  • Like 1
Link to comment
Share on other sites

13 hours ago, Billhook said:

Just discovered the Janka scale which reveals some surprising facts about different woods.  It measures the strength in terms of the force needed to break a certain size of timber in special press.  Australian Buloke is top of the list at 5000 ft lbs and Balsa at the bottom with some bits as low as 22 ft lbs

 

https://en.wikipedia.org/wiki/Janka_hardness_test

 

Hornbeam has a  Janka     of    1630 ft lbs and a crushing strength of 7320 lbs/sq inch

English Oak                                   1120                                                          6720

Apple                                              1730                                                          6030

Beech                                              1450                                                         8270

Elm                                                     810                                                         4740

Ash                                                  1480                                                          7400

Holm Oak                                        1610                                                          no data

 

first of all that list of numbers is highly suspect and secondly this test does not "break" the wood.

 

the janka test uses a press to find out how much pressure is needed to force a hemisphere at .0444" diameter into the wood on three surfaces. these are the face, side and endgrain. then an average is given as the hardness from those three figures.

 

here is one of the tools used.

Janka test ball.jpg

 

the test has been done on thousands of different species but as most of these are commercial timbers the "hardest" wood may not be one of them. also the inaccuracy is a major problem as sometimes you only get a couple of sources and these can differ greatly in their findings.

 

my mate eric at the wood database did a great video about the buloke species (supposed to be the hardest) and he has tons of books and has don years of research on the subject to try and get his website as accurate as possible.

 

 

 

one thing to remember after digesting all the info you find on the hardness of wood is that is the hardness of a timber has absolutely nothing i repeat nothing to do with how easily the timber will split. not all hard timbers are that interlocked.

 

the interlocking of the timber grain is what makes the timber hard to split.

 

  • Like 7
  • Thanks 1
Link to comment
Share on other sites

  • 2 weeks later...
On 24/10/2018 at 00:42, nepia said:

Eucalyptus even when wet can be a bastard because it grows in a spiral.  I've been trying to split some recently and have given up on anything longer than 12" as I'm more destroying the logs than splitting them.

 

I acquired some 20" dia hornbeam a couple of years ago that wasn't a problem at all recently (Oxdale 400 splitter) except for the fact that most of the rings had been cut at 30 degrees to the grain direction so had a habit of not staying where they were told.

I'll second that...eucalyptus is the worst I've tried, it actually seems to get easier with drying and cracking though, I found. It burns fantastic however, temp on a wood stove goes off the scale

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.