Jump to content

Log in or register to remove this advert

Recommended Posts

Posted (edited)

I do most of my day towing trailers and my tri axle with the crane on is a dream to tow, I would always choose a tri axle over a twin axle unless the loss of payload was going to be a major problem.
Not worrying so much about load distribution on the tri axle is a huge bonus for me as I unload pallets at different addresses.

Edited by scraggs
  • Like 1

Log in or register to remove this advert

Posted
29 minutes ago, woody paul said:

Also look at the build quality of British ( ifor williams ) trailers last week when picking up a secondhand trailer I looked at new ones and could not be leave what I saw Galvanising was bad spikes all over it.

Are the German one better finished  

My 14ft Unsinn still draws compliments despite it being 3 years old with 30,000 miles under it's belt. Very nicely finished. I visited the factory a couple of years ago and the production process is clinical. 

 

Looks like either tri axle UK trailer or two twin axle European trailers!
 

Posted
32 minutes ago, richy_B said:

Also an item to think about - I just ordered an Ifor tiltbed trailer from my local dealer. I was quote 20-22 weeks for delivery!

 

Have you considered a tiltbed? I went for a TB4621-352 with removable 'mini ramps' so I could overhang if needs be. Despite the mad delivery time I was impressed with how easy to use it was.

Batesons were quoting 5 weeks. Their tiltbeds look lovely, but again, £4k plus with the sides.

Posted
38 minutes ago, richy_B said:

Also an item to think about - I just ordered an Ifor tiltbed trailer from my local dealer. I was quote 20-22 weeks for delivery!

 

Have you considered a tiltbed? I went for a TB4621-352 with removable 'mini ramps' so I could overhang if needs be. Despite the mad delivery time I was impressed with how easy to use it was.

20 weeks they must be joking, I would ring another dealer and find out there delivery time, could be the one you are dealing with doesn't sell enough to get hold of them as and when they need them.

Posted
36 minutes ago, woody paul said:

Also look at the build quality of British ( ifor williams ) trailers last week when picking up a secondhand trailer I looked at new ones and could not be leave what I saw Galvanising was bad spikes all over it.

Are the German one better finished  

don't trailer manufacturers send their chassis off to be galvanized?..  I mean I don't exactly know to be honest but I imagine they mostly do..

 

which begs the question, why complain about the finish if its not them that did the galving?..

Posted
7 minutes ago, Vespasian said:

don't trailer manufacturers send their chassis off to be galvanized?..  I mean I don't exactly know to be honest but I imagine they mostly do..

 

which begs the question, why complain about the finish if its not them that did the galving?..

I believe Ifor now have their own galvanising plant, or so I was told.

Posted
Batesons were quoting 5 weeks. Their tiltbeds look lovely, but again, £4k plus with the sides.
Certainly not cheap especially compared to a standard flatbed with a ramp. Hard to justify in many cases. They do seem very safe though in un/loading. No tipping points as you come off the ramps with tracked machines etc.

Posted (edited)
5 minutes ago, Vespasian said:

don't trailer manufacturers send their chassis off to be galvanized?..  I mean I don't exactly know to be honest but I imagine they mostly do..

 

which begs the question, why complain about the finish if its not them that did the galving?..

The state of some of the trailers I saw where bad and should of been corrected. Thought Ifor did all theres in house.

Edited by woody paul
Posted
Just now, scraggs said:

I believe Ifor now have their own galvanising plant, or so I was told.

Well I wouldn't know one way or the other, maybe they do maybe they don't.   anyway, who's really bothered aboutt galv looking a bit untidy in places.  as long as it covered it's all that matters..   

Posted
20 weeks they must be joking, I would ring another dealer and find out there delivery time, could be the one you are dealing with doesn't sell enough to get hold of them as and when they need them.

I did ring around. It seems to be Ifor. 20 weeks is crazy. If they weren't offering me a good trade in I'd go with a different brand.

 

I was told it was an unusual trailer - Insoecced it with the standard electric winch but other than that it was bog standard.

 

I've had 7 Ifors over the last decade and as a brand they are going down hill. Quality and customer service has gone out the window. They've gotten too large/dominant and lost focus in my opinion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.