All Activity

Possibly Phaeolus schweinitzii, mostly found on softwoods but can affect hardwoods

I chip any slabs that are 8" or less, stack the larger ones with a 2" sticker between layers and process after 6 months into firewood for myself and also for a local mobile sauna company (they want small length, and anything from kindling size to decent log size) If using a processor there will be a huge variation in size. For my own fire I process without the knife and if there's anything too chunky it gets a tap with the axe when filling a basket for the house from the woodshed. Only mill larch, Cedar and Douglas at the mill and it all burns well in a 12kw stove

The echo dsc2500 seems so over looked in favour of this things, get the battery echo which is way more capable. By far the best saw I have ever bought.

Not ear wounds. Over 20 years of deer control and culling I have taken 2 headshots for welfare reasons, the one quoted was a bag of bones I spotted with a severe limp and stalked up to just under 80m iirc, she had laid down in a hollow and there was a barbed topped wire fence between us. I could have walked around 4-600m to get a better shot but I would have been winded by her or I might have bumped another deer on the way, I dialled in for 80 or whatever the rangefinder said and as there was an inch of crown showing I thought that it was on. Unfortunately the shot went right of the aim point, possibly it touched a grass stalk, and put a neat hole through her lug, and the only blood was a splash where she was and no trace along the trail she ran. I got her in exactly the same place a few days later in the same circumstances but this time I dropped her and that's how I knew I'd hit her lug, her teeth were worn flat to the gums/jawbone and was literally a bag of bones and wasn't lardered just left out for hoodies etc close to a high seat to entice a fox onto it. I've shot hoodies out beyond 200 and punched paper at Bisley and other ranges out to 500, at 100 I'm happy to say I will cloverleaf using my home loads and BT's. Finally I'm not au fait with American white tail deer but I do know my shot placement on Roe, fallow and red.

Look forward to hearing how you get on with the Fakita, if it’s any good, for the money it’s a no brainer. Where do you get spare chains from though?

Things like the trees in the London parks normally managed by big tree firms . But I do recall few years ago surrey council wanting a climber / office bod and they were to oversee consultancy and tree teams ...for that they were offering 33k a year and also needed a degree to do the job too. I await the usual twats to comment . But I looked at it and thought it wasn't worth the wnk

Two-time Ali challenger Bugner dies aged 75 Joe Bugner: Former heavyweight boxer - who fought Muhammad Ali - dies aged 75 WWW.BBC.CO.UK Former British heavyweight boxer Joe Bugner - who faced Muhammad Ali and Joe Frazier - has died at the age of 75.

Need Steve B to give a "smirk" emoji for the jokes page.

Thanks for your help ! I'll get an Oregon 124mlea041 bar and a 3/4" .043 chain, apparently compatible with 2511 tes.

If it is, it's unlikely any other Inonotus I've ever seen.

Or if you were really stuck you could do this, but proper tyre lube makes it easier. https://www.youtube.com/watch?v=bWd5vwUeYno

Absolutely.

Thanks 👍 I have thought about that. I've had colleagues who have gone down that route. If I'm honest with myself I still love the industry were in, just maybe need some time away from the production side of it. Maybe it's the places I've worked but I've had enough of removing trees that dont need to be or reducing trees to the customers spec regardless of the tree health. One idea would be consultancy (ideally self employed) or working in the London parks. Again I have very little knowledge of how either of those jobs actually work. Do you have any experience with either of the two ?

OK, lighting blue touchpaper and retiring: I went into a local branch of my regular suppliers, and asked for 5l of Synth plus. They only had Forest Plus in 5l. Was I right to walk out without purchasing any? It's not urgent, I just happened to be passing. I subscribe to the doctrine of " if it ain't broke, don't fix it ", and Synth Plus has worked well for me. Sorry for re-igniting the debate.

The Fakita appears good, it does have a proper oiler and reasonably sized brushless motor. It is a 1/4" chain. I like the mini narrow bars. 1.5kg without battery, 2.1kg with Makita battery.

They take a fair amount of space and are heavy to move, also needing power or compressed air. Wouldnt have been practical for me, I have extremely limited space.

I'm in the same position as you, Muddy. Take the plunge and report back please. £52 for the one you posted would be nice. Only difference is I would be happy to spend £200 if it gets me something of better quality, even if still manual.

good to know thanks

Its worth getting tub of proper tyre lube and fairy can cause corrosion, lots of salt in it.

Muddy and Mick (and indeed several other people now I re-read) are onto something I think. Have an expert do the precision work and buy a backhoe for the rest of it? Or do it all with the backhoe if you have the patience. Forget bog work obviously.

He's beyond tapped. Trumpanzees: If Biden was rambling on like this would you have given him a free ride too? 692K views · 22K reactions | This madman, who thinks there is some... WWW.FACEBOOK.COM This madman, who thinks there is some kind of magic valve that takes a day to turn to release water from the north, is the same lunatic that was handed the nuclear launch codes 🤦.

thanks, but £200 would be too much for the number of tyres I do.