CDMR
-
Posts
129 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by CDMR
-
After ten years of chainsaw milling my back has decided it doesn't want to haul and stack dirty great slabs and wrestle with a big mill anymore. As a result my 880 and custom 70" mill kit are up for sale in the classifieds. Very happy to do a deal on the complete set up. I can courier or collection from Carmarthenshire.
-
- 2
-
-
-
Time Left: 6 days and 18 hours
- FOR SALE
- USED
Stihl MS880 Chainsaw with a Stihl 48" Duromatic bar and Oregon chain. The saw is complete and in full working order with a new Stihl oiler recently installed. It is a fabulous saw which has never let me down. It is still in great order and runs faultessly. It starts every time and oils well, even on much larger bars. It has been well looked after. It is always allowed to warm up and cool down properly and is never left to cool with a tensioned chain fitted. Any replacement parts have been genuine Stihl and it is always run with Stihl Synth bar oil and their two stroke oil. The bar has seen quite a bit of use but is well maintained and still in good order. I have only used the chain once. It has probably done around ten cuts. The delivery fee quoted is to mainland UK but feel free to contact me for a quote for delivery to more remote locations. If you fancy a great Large Log Milling Kit to go with this saw, have a look at my other items.£1,200
Llandeilo, Carmarthenshire - GB
-
Custom Granberg Alaskan Chainsaw Mill 70" With GB Bar and 6 Chains
CDMR posted an advert in Miscellaneous
Time Left: 6 days and 18 hours
- FOR SALE
- USED
This is a custom chainsaw milling set-up using MkIV Granberg mill parts complete with a 74" GB Bar and Six Chains. As a package it is more than capable of milling logs up to 160cm in diameter. The mill itself utilises single piece bars instead of the jointed bars in the Granberg kits so as to give greater stiffness. The mill is also fitted with a winch which really reduces the stress on the operator. It is fitted with quick release upright clamps which really helps when making depth adjustments, particularly if you are operating the mill solo. It is in great overall condition, there is a bit of rust on the handle bolts but it is fully functional and ready to work. The bar is a GB 74" .404 bar with nose sprocket and is in good used condition. It is compatible with the large Stihl saws (MS880 etc) and Husqvarnas with an adapter (not included). There is a small drill hole where I was planning to add an auxillary oiler. There are six chains (196 link): One New Oregon 27R Hyperskip. One New Panther Hyperskip. Four Oregon Hyperskip chains with varying amounts of cutting tooth remaining, see the photos to get a better idea. The ones with just a little left are useful if you think you might come across metal rather than potentially waste a new chain. There are also a couple of bags of spare links and rivets. Overall this a great package with most of what you need to get going on milling some hefty logs. Delivery price is for mainland UK. Let me know if you want a quote for more remote locations. Sorry it is fairly pricey but long, heavy packages are a bit costly to pack and send. Collection is available from Llandeilo, Carmarthenshire. If you need a good beefy saw to go with this package have a look at my other listings for a well maintained and reasonably priced MS880 that is ideal for this setup. Thanks for looking.£600
Llandeilo, Carmarthenshire - GB
-
It can be due to hammering the wedges in too far. It lifts the middle of the slab you are cutting and points the mill down at the end and, as you say compounds with successive slabs.
-
I use a 48" Lo Pro on the 661 form milling. It starts to struggle on harder woods, particularly if they have been down for a while but is a useful setup if you are meticulous with your sharpening. Larger than that I switch to the 880. I would have thought for general tree work it would be too slow.
-
It's a sod though because if you do dry it quickly (or slowly actually) it warps like a bastard and it's generally too small to be easy to get weight on to to keep it flat. Bloody good fire wood, just wish I hadn't spent quite so long preparing it.
-
The steel section is smooth and has rounded corners so fairly easy for it to roll without something that engages with the guide beam. You can always flip the beam so at least you get two uses. I'm not saying its a good design (in fact I said it wasn't) just what I think they are intended for.
-
They leave marks on the beam you use as a guide so you can tell if you start to go off vertical as the track from one of the pips disappears. Personally, never use mine for anything but the roughest jobs.
-
Only air drying slowly then finishing in the kiln slowly works for everything. The big commercial set-ups are about putting big batches through quickly so they can hone in on an optimum balance between speed and quality. If you are producing specialist timber you can't realistically go through this process. The other issue that gets forgotten is that kiln dried timber is only kiln dried when it comes out of the kiln. If you store it anywhere other than in house like conditions it will soon go back to an air died moisture content again. If you have a large stock that could get pretty pricey. You could be better off offering all your timber air dried and then offering a 'finishing' service of kiln drying it where required.
-
Chaps, Had an enquiry from a lady in Wolverhampton that has a Hornbeam down in this weekends winds. She's looking to have something made from it. It's a bit off my patch so DM if interested and I shall pass details on to her.
-
Could the works be delayed for a while? Could be worth seeing if Network Rail have any scheduled closures in the future e.g. for track renewal. If you can jump in on someone else's closure it may not cost and you may not have to work within 45 minute windows. Doesn't look like there are overheads or third rail so could be fairly simple.
-
To the timber, no. To the saw, maybe. To your lungs, definitely.
-
That's going to be some heavy work!
-
and I cannot Lie. You other fellas can't deny.. This log was pretty rotten but got some 1.5m x 1m slabs at 50mm The other was very similar, covered in really deep burrs and about .75m x 3m I also got a load of big burrs up to 30" diameter. Any ideas as to the best thing to do with them? I am assuming, seal and dry very slowly then find a turner with a really big lathe? I believe they are silver maple.
-
It looks awesome but doesn't it turn it into a thief magnet?
-
The other problem with a trad planer is workshop space. You need a lot of infeed and out feed space as opposed to moving the head over the work.
-
Definitely interesting, what's the likely price?
-
Lovely work. Great details, the bead on the bottom of the rail, chamfer on the buttons etc.
-
I wouldn't worry too much about starting lo-pro. I have and have had very few teething problems. There's not a lot of point in going for a bigger rig than you need. You just use more consumables and have more large gear to tote around. If you mill away from home as it were, you can also have the problem of not being able to get your rig in where the log is which is one of the big advantages of an Alaskan. I run a 36 most of the time, 48 occasionally and the 72 hardly ever. As for paint, cheapo bitumastic roofing paint works well for me.
-
A little spot of spalted Sycamore from a local pub garden.
-
Did occur to me as well that linking it to a panic function on your phone would be useful. Automatically texting 'I have fallen out of a tree / chopped my leg off with a MS880 at the following location: Flange-Otter-Bedsock Blood Group: Rebellion IPA'
-
It's an ingenious system. I don't think there is a single house in our postcode that has a number so I wish delivery drivers and minicabs would start using it. Great if you want to meet your mates at a non-urban location too, just text them the three words.
-
Getting worse would imply it's the cut. So either the chain or chain/bar interaction. Is the bar out of parallel to the frame front to back perhaps?
-
Does the dip get more pronounced further along the cut or is it constant?
