Jump to content

Log in or register to remove this advert

david lawrence

Member
  • Posts

    195
  • Joined

  • Last visited

Everything posted by david lawrence

  1. How best to eradicate or more likely reduce mares tail growing in a riverside field. My friends are trying to make more of a mixed meadow instead of a grass field with some success apart from the dreaded mates tail Any thoughts ? thanks david
  2. How about covering hoops separately and making two small ones. One with mesh and one buried?
  3. I’ve tried them as giant plant pots but found they did go out of shape a few old posts could sort that though
  4. My McCormick reverse drive tractor has losts its drive fault traced to hydrostatic unit the parts are available with possible large bill to fix depending what is found once unit opened up. Between 3,000 and 5,000?£ Sell it for parts and buy another get it fixed my budget would be £7-8000 what to do for the best any inside information????? david
  5. Hi my little reverse drive tractor has lost its drive and it’s traced to hydrostatic drive unit the parts are available but bill for fixing could be 3000 to 5000 £ any ideas what I might get for it as a non runner ? where best to find a replacement or just give the go ahead to get it fixed I don’t have the time to or really knowledge to buy a better one in the sub £7 or £8 thousand bracket Whats the way forward ? thsnks david
  6. I’ve got a push along blower which can also collect. Pointless really as bag fills in seconds
  7. Sorry to but in any chance mr dumper could give me details of who repaired his alpine tractor would do a pm if I knew how thanks david
  8. Back again could I have details of who repaired your hydrostatic unit pls dumper if you still have them? was it an actual McCormick tractor? thanks david
  9. Interesting replies Who did the recon job on yours mr dumper ?
  10. Hi I’ve a McCormick g30r reverse drive model its lost its drive the input to the hydrostatic unit is turning but tractor barely moves. In low ratio it just about creeps about Mechanic has drained hydro oil and found metal in it so things looking bad if dealer can’t supply a new unit any ideas where I might find one? Thanks david
  11. Obvs not. It’s for stoking our gasify boiler or filling up buckets for the house
  12. I use a plastic grain shovel works fine
  13. Ps. If you dry the branches first they will be harder on the machine and there will be more shattered up small bits. Not good ???
  14. I use the nets twice after two seasons they are disintegrated also put them in in barrow bags with two mesh sides. They seem to dry ok only fill to max two thirds full or they are too heavy to shift about i see yours are under cover. I leave mine out in wind and sun with some sort of cover over the top AgreeBranch loggers are a faff on but I like to make waste into something useful
  15. Hawthorn branch logs are super prime fuel
  16. I was wondering the same thing might be a bit dry for the new hedge plants competing with existing hedge nice and weed free thou with the gravel but plants might prefer an organic mulch of compost or leaf mould
  17. Take a look at the village idiots posts about his woodland management work. Very interesting and potentially relevant
  18. If it is birch it looks like it may be too rotten to be worth while. Birch rots v quick if left
  19. Hi any opinions on how my leeks will survive prolonged frost going down to -9 I could lift ,saw them up and put infreezer or just leave them to it only got about a dozen left so not a big disappointment if they don’t make it Thanks. David
  20. For that amount of use wouldn’t hiring some one in be possible rather than £10,000 odd of machine sittingbabout waiting to be used once every 2/3 years
  21. Could be a clue in the post title?
  22. Chilli’s?
  23. Another vote for hydraulic or a fiskarsx27axe
  24. Thought elm but no so likely to be one by itself ?

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.