Jump to content

Log in or register to remove this advert

roys

Member
  • Posts

    739
  • Joined

  • Last visited

Everything posted by roys

  1. Store my Tirfor cables in old motorbike front tyres. Found the local bike shop is more than pleased to let me have some of their old tyres.
  2. Sell Ian the new stuff then?
  3. Update, so was clearing away some of the devastation trees on the ditch side for my firewood stock, happened to block the road with some logs so no one could get up or down, anyways the person who employed the contractor was driving down, stopped, got out of the car and apologised saying it was a mistake, she had told them to cut the left hand side thinking they would start at the top unfortunately they started at the bottom, so wrong left!!! Although the ditch should have been a big clue. Anyways we have asked that at the very least they should come back and tidy it up, remove or chip the brash. So to coppice it do I just Chainsaw them about 6” up from the deck? Cheers
  4. Posted this on another thread, didn’t even want my trees “pruned”
  5. Hi Kriss Track is for 3 Crofts, the three of us are equally liable for track maintenance, one of the owners who does not “integrate” with myself and the neighbour. The loner who has not done much track maintenance suddenly went for it, think they got in contractors to clear the trees to free up the drainage ditch to enable the water to flow of the road better. Think my trees were cut by mistake as no ditch on that side, ditch is on other side.
  6. I was away for two weeks, during those two weeks I came back to the sight of a load of my trees running along the track to my house have been cut / devastated by what I presume is a flail mower. Think my trees on the right were done by mistake as they were clearing the ditch on the left and there is no ditch on the right where my trees are. Accidents happen, so not going to make a big deal of it. My question is what do I do with those ugly flailed tree tops: I could just leave them, but there are ugly. Chainsaw them at the start of the chewed up bit. Chainsaw them at ground level None of the above. Cheers
  7. Bought a wrecked house at the end of last year, 1st thing I have done is put in a log burner to try and work in a bit of warmth as the electric, gas and plumbing are all knackered and isolated. At the stage I am at just now, I think I am treading mud, as the house just appears to be getting worse as I pull more and more of the stuffing out of the place.
  8. That made me smile,
  9. Cheers Spud, there certainaly was not as much resistance *on the pull” as my chainsaws, but it didn’t feel too bad. The compression tester is one my mate uses on scooters and says he usually gets about 110 to 130 psi on them, don’t have any other hedge trimmers to compare it against, it is the 1st one I’ve owned.
  10. Cheers for that, will check it out, once I work out how to do that ?
  11. Bit help please, bought the hedge trimmer at an Industrial Auction House. Does not look like it has had a hard life, however it won’t start. I have changed the fuel for fresh stuff and did a partial strip down of carb, no gumming found. Took plug out, which looks new. Held against body weak spark visible, tried a different plug slightly stronger spark but still looks weak to me. Even warmed a plug up, still no joy. Tried Eazystart in plug hole then put plug back in, not even a splutter. Makes me think not a fuel prob. Did a compression test 75 psi. Is that good or bad? What do you think, ignition pack? Cheers and thanks for reading
  12. Well worth the read, good luck with your recovery.
  13. Thank you for the reply gents. Lazurus, that lathe you linked to is very similar to my mates, I wouldn't mind a setup like that. Pity it is in deepest England? Keep em coming cheers
  14. Hi Folks Looking for a wood working lathe for myself and apparently my wife wants a shot as well. I do a bit of turning but it is metal on my Colchester Master lathe which was built in 1966 and is ace? I hate poor quality tools, so want a decent one and some tooling, but I am not familiar with wood turning lathes. If anybody hears of, or sees a decent one on the likes of eBay can you let me know please. Within 100 miles of Central Scotland would be ideal. Many Thanks
  15. Lots of good advice on this thread, 100% agree with getting rid of toxic people that In in your life, was told that where possible surround yourself with positive people, positively breeds positivity.
  16. roys

    Angle grinder blade

    Yes, but I did have safety glasses on. Put a field dressing on it, went to a&e, they said sorry can't stitch missing flesh, man up, made me laugh. That pic was after I took their dressing off it a week later.
  17. roys

    Angle grinder blade

    I like angle grinders, we have a close relationship, check out my avatar as evidence ?
  18. 750/12 is about 63 amps, that is going to drain most batteries in quick time. With a lot of inverters they usually cut out after they sense a voltage drop in the battery of about 1.5V. Think it would cause that cut out fairly quickly ( one minute at a total guess) in all but good and big batteries. Also cables are going to have to be up at about 16 or 25mm to handle that sort of current.
  19. Got a few Golden Virginia Baccy tins as well,
  20. Just out of interest are those anchors into the stone secured by resin?
  21. Have to agree with the above about using tec screws, I did once try using products like "grip like sh1t" to attach batons to a steel shipping container and it was shit, think the problem with trying to use adhesive is that the metal of the container shrinks and expands in the sunshine at a different rate to the wooden batons and breaks the bond. It gives you a laugh when you go out a week after completing the job to find the woodwork all down on the deck.
  22. Much the same as Dan, got a Charnwood 16kW, gives me my heat and hot water, think mine is about 11 years old now.
  23. Good luck Big J, only met you the once up here but it was a pleasure and I am sure your strong work ethic will see you through.
  24. Nice garage doors?

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.