steve collins

has anyone else info that this is true, that the 390 will no longer be available after January as a new saw is on its way??

It is worth using for the health benefits but, i average around 800-1000 liters fuel a year Pump fuel costs av £1.40 L down here so £1400 a year Aspen is £3.04(bulk pricing) L so £3048 a year £1648 a year difference - to make this work id have to cut at least an extra ton/m3 in the wood a day I have seen the can and used it. Its well thought out but wouldn't want to damage it though

The problem is saftey and cost go hand in hand tho, lets hope there are no accidents on this job !!

The article on the Fisa website deals with the use of wedges whilst felling ash suffering from dieback - the advice is not to use wedges to knock the tree over. The vibration caused by hit the wedge risks causing dead branches etc to snap off and fall onto the chainsaw operator. The advise winch assisted felling or use of a hydraulic/ratchet type wedge "It is essential then that operators retreat fully into their escape route when the tree begins to fall and that the use of traditional wedge techniques is minimised." " If traditional wedges are used then it is preferable to use wedges with a more acute angle than traditional high-lift wedges these are driven into the tree with less force, the thought being that this will create less vibration and will therefore dislodge less deadwood" cant see anything about winch assisting, the way i read it is they still allow the use of wedges all down to how its interpreted really. https://www.ukfisa.com/assets/files/alerts/Safety Guidance Note - Felling dead ash - April 2018.pdf

we only use skinny wedges and stack them if needed or use winch. There was a memo stating to not use hi lifts but cant remember from who.

Yes your right it was the objector who was saying fell at 2m but from what i can gather is that he is also the owner of two of the woodlands so id hope he gets a say in whatever process they choose. They should just identify the worst trees and come in with a thinning programme which may take out pockets of trees but leave the remaining trees for monitoring/inspection and less chance of windblow, also the retained trees can be identified easy for ongoing works. Harvesters are an option where they can cut the easier material(cleaner/straighter) but the head/machine does take a hammering, personally its a hand cut and winch job. Im sure the job has gone out to tender, be interesting to see who won it and how its being completed

I know you have the kit, But can an excavator with a grapple saw cut accurately to length? or will it go through a bed processor aswell? no different to a harvester or highly skilled handcutters?? imo As im sure the trees being cut would have to be sold on as firewood. Its all down cost at the end of the day

Now most likely they will get a harvester in to do the job as there have been words from euroforest saying no hand felling of ash as its safer?? What happens when they get to a rotten tree/ heavy leaner or tree to big for the head??

Have just completed a job this year where 550 plus mature ash were felled on a THINNING PROGRAMME where the trees are heavily monitored over 5 years due to it being a high public access and has a road along one edge, what they are saying is a clearfell which is just ridiculous. Now the major problem is that they are saying they " will only fell them at two metres or six feet, in case there is re-growth that may withstand the disease." Hands up who wants to fell potentially rotten diseased ash at 2 metres??

Refreshers are needed as there are still trainers/colleges out there handing out tickets like sweets which is not good for industry!! All you end up with people who are competent on paper but are absolutely useless all because it looks good that they pass so many which means more business which means more MONEY MONEY!!

a 560/562 is a hard saw to beat in the 60cc saw catergory but will need regular maintenance and spot on fuel mixing or if your a part time user go for the makita/dolmar as they are a solid saw with a simple carb and no electronics

ive got one with over 700 hrs on and no problems at all

2017

Ive seen a few on other online platforms with broken clutch covers, i believe they have been replaced but a slow turn around, try a 390 clutch cover as that may fit

yes, how much are you after? i can point you in the right direction

a local wood cutter was stung 21!!! times by hornets didn't make it to his truck was luckily found by public and ambulance came

woodlands have been hit hard in the south east, lots of felling has been going on for years and a few sites have been thinned where there are lots of dead standing and seasoned trees! this is with still healthy trees next to completely dead. One site is so bad a clearfell is likely to happen, another has mature 70 foot plus trees where there is lots of decay in the base making felling difficult. most landowners and agents are on the case where trees have been monitored prior to the works but looks like the ash tree is going to be a rare site soon

still looking for one more person to help out???

462 is just a little heavier than the 560 ive only used it felling oak, chestnut and ash so cant say what it is like in softwoods, runs a 20" fine never had chance to put a 25 on to see how it responds. does seem a bit fragile around the back handle area and the switch is backwards compared to the husky 560.

Bump!! Still looking for someone??

I have a months FORESTRY work at canterbury starting september this year looking for someone who can get to site, work in all weathers and put in a days work consitently. Pay dependent on skill set. Must have cs30/31 and first aid +F Work is young coppice and oak felling Message on here please as signal is horrendous where i am at moment

Looking for an additional woodcutter to join a gang, must be reliable, able to get themselves to site, be organised and cut to spec. Good rates paid, work is mostly on tonnage/m3 and mainly hardwood. Must have Cs30/31 Cs32 would be an advantage and first aid at work. Would be willing to take on an apprentice if only have Cs30/31. send a message on here or phone Steve 07751057259 Cheers

Looking for a response to the above to actual mpgs of people who own new or few year old 4x4's or vans as looking to upgrade soon . Usual suspects, Hilux, Navara, Ranger, dmax, amorok,transit connect,merc citan, berlingo, transit custom or any others i have missed Cheers

It is a far superior saw to a 576xp Thats what i wanted to know

yes three saws were up for grabs at a dealer and one went straight away, i guess the others have gone now. saw sounded nice although thought it would be lighter than a 576 but felt around the same