spudulike

Not really...just do any sale etc via PM rather than doing it in open forum....if the part is correct:thumbup:

No worries, glad it is on the way to being repaired, it is what the site is about:thumbup:

The cylinder will need cleaning of aluminum transfer and a new piston fitted, lots on this thread on how to do it!

:blushing:bugger, been found out - I just sit in the workshop eating cake and drinking tea...surprised it has taken this long for anyone to find out:001_rolleyes:

Yeah....and sling-backs - that will make an impression:lol:

Mmmm, my wife breaks things, sat on the dogs on the 298 once - language was a bit blue:blushing: Best kept away from the masters bench:thumbup:

Shirt, jeans and shoes....smart casual - shows respect but not too much to make the owner feel uncomfortable. Cleanly shaven and combed hair etc. It shows you have made an effort. One further bit of advice - ASK QUESTIONS about the business - how did they get in to it, number of people employed, equipment used, how is he finding the current economic climate, try to catch a common interest, football, fishing...sense of humour etc it Will help. Other things to mention are your transport, if you are married, have kids, it shows you need to work especially if you own your house - they can't legally ask you some of this stuff but if you offer it as an angle to show you need to work........

Sounds about right, I have a "Staff Only" sign on my workshop:thumbup:

Its all those young girls strutting round in jodhpurs and swinging whips you like...admit it:blushing:

The same:thumbup:

Don't think you know what you are talking about Rich, you some sort of expert of something:blushing::001_tt2: Sounds about right to me - just get a few metres of the fuel pipe in, always useful:thumbup:

I do a bit of logging for my wood burner and a fair bit of saw servicing. For the logging - A saw:thumbup: Files, flat and round plus a file guide and gauge Scwrench (screw driver/wrench) Fuel mixing container Funnel Two stroke oil Chain oil Axe for splitting Saw horse - nice to get logs at the right height and held safely Helmet with ear and eye protection Steel toecaps - easy for an axe to glance off a log and take a toe off:blushing: Trousers - Gotta say I tend to wear them only when out in the field rather than cutting up logs on a saw horse in my own drive but thats my choice! I do wear gloves but more for protection from rough work rather than from the saw!

Never an issue and appreciation makes it worth it....cheers:thumbup:

Well thats me told, there are one or two on here that may disagree with you but everyone has a right to an opinion. I did try to answer your questions, a dry plug means you have no fuel, you need to inspect the insides of the carb to see if there is fuel in the diaphragm chamber, if there isn't then check the pumping section, if there is no fuel in there it is probably a tank vent or impulse problem, if there is fuel in the pumping section and not in the diaphragm chamber then it is probably a metering arm height issue. If there is fuel in the diaphragm chamber then the jet or fuel pickup hole in the carb may be blocked. I hope you follow me so far, you may get further info on my "Whats on your bench thread":001_rolleyes: Expert....Nah:001_rolleyes:

Here you go - Car Auto Moto Bicycle Repair Part Universal Spark Plug | eBay

I did find these oversize plugs on ebay once....from China....highest quality:lol: An option though:thumbup:

This is the type of repair I favour, helicoils are good if the part is tightened and isnt disturbed often, a sparkplug is reasonably often removed and is under extreme conditions of pressure and heat. I used aluminium inserts but had problems with them blowing out, What really works is cutting a real decent thread with a deccent tap and inserting a steel insert with a bit of loctite high temp / high strength thread lock - loctite 270 is good. The important bit is to get a deep well formed thread for the insert to key on. Cheap kits have poor taps and that forms a poor rounded thread and that will let an insert blow out!

Personally I reckon Stihl are attacking the largest UK online traders to the benefit of the smaller trader, guess they don't like online trade but thats the modern way to do business!

Well, the customer pays for the spares, nothing I can do about that and if they take longer to come in there is nothing I can do about that either:thumbdown: To put it in to context, the saws I am working on now came in late last week and now spares are on order and should get them finished late this week or over next weekend - I run a one to two week turn around, the stupid Stihl Policy may impact on this although my supplier says nothing will change:confused1:

Haven't checked for why it has seized but will obviously will pressure/vac test it and do a tach tune plus check the tank vents etc to make sure it doesn't happen again - will set it a bit fat to let the saw bed in:thumbup: The pot has a couple of scores, none are particularly deep and although they show on the pic, are nothing to worry about. Recently did an MS260 that I thought was borderline and it pulled 190psi - sort of changes your views on this sort of repair! The marks can't be felt and are out of the compression zone above the exhaust port so reckon it will make good compression and power - the look of the thing can be a bit unimportant and the engine doesn't SEE the marks but as long as a good seal is made, all will be good. The options are doing what I am doing (Meteor in the cleaned OEM cylinder), a damn expensive OEM cylinder/piston kit or a Chinese P&C kit...reckon this will give good life and decent power - local guy so will be able to keep and eye on it:thumbup:

Got a MS200T in with a "Loose exhaust":001_rolleyes: thought it would be a quick job:001_rolleyes: One thread was stripped, the other had a broken bolt in it, the hole on the left was tapped and had a new helicoil fitted - lovely job:thumbup: Tried drilling the broken bolt out and bingo - it has been helicoiled already. Any budding engineer will tell you that helicoils are stainless and therefore are a mare to drill out and almost impossible to re-tap:thumbdown: The drills kept wandering, even the posh colbalt ones I was using - £35 a set:blushing: and the hole got pretty crappy, wasn't sure I could pull this one off - a helicoil was out of the question so used a fancy M5 insert I had purchased for this sort of eventuallity - it is a 5mm internal hole so standard to the original bolt and the external was M8x1.25 - pretty large but the land around the hole was large enough - I put it in with some fancy Loctite high temp/high strength studlock and looks like nothing will shift it. Once screwed in, you bash in the tabs to lock the insert in place (see last pic for the finished job and a pic of the insert I used) - a nice job albeit a lengthy and difficult repair! A new fuel tank backplate has been fitted as the original has melted and fortunately the tank shows little heat damage!

Got an MS660 in, looks in little used condition but it has seized. The new piston is on order and have now cleaned up the bore - first pic before and second after:thumbup:

Busy weekend, MS180 which wasn't running right, took the carb off, cleaned it out, air filter was filthy, checked the piston, compression was 150psi:thumbup: reassembled and started and ran OK...no oil though! Checked the oiler pinion and the part the arm fits on to has worn away leaving the arm a loose fit on the pinion - new part on order and a common fault. Next up a Stihl 011. In good nick but the throttle cable had snapped. wanted to give it a going over anyway and sorted the recoil that was pretty ropey:lol:, fixed the stop switch, cleaned the carb out, pulled the clutch drum off as it had a piece of twine wrapped around it causing issues with the chain running all the time. The saw now starts sweetly and idles and revs fine - just need the throttle cable now. MS200T - full refurb needed - symptoms were it would idle but wouldn't rev out at all - pretty flat sounding - now reving out to 14KRPM and ideling spot on and looks a damn sight cleaner:thumbup:

I usually pull the things out with the tube method and then cut slots in them with a hacksaw - makes adjustment far easier!

Well Leon is Leon Wright, their Sales Manager - found that much out.....possibly something to do with the Arb show near Cirencester????