doobin

It would stabilise quickly, influenced only by a rising life expectancy. One child per person (or two per couple) is simply one child to replace the person in question. One child per couple would lead to a drastic reduction in population, hence I agree with China's policy. It's an unpalatable truth that nature's population control is practised (and needs to be practised by way of starvation in the human population. This is why the argument for GM crops 'to feed the world' doesn't stack up. You're simply delaying the inevitable. Better that a few million suffer starvation now rather than a hundred million of their descendants. It also raises the quality of life for the rest of the population. We're always told that we 'will need to feed x million more people by 20YY'. No we won't. Nature makes the rules, we can only bend them so far.

I was told that too and I think it's rubbish. Incredible amount of variables such as the weight of the saw, length of the bar, grip factor of the surface. All these 'rules of thumb' do is confuse newbies. In the end only mechanical understanding and experience will tell you if a particular saw is tensioned correctly. You can tell a lot by the sound made as you pull the chain over, or at least I can. You can hear worn sprockets like this too.

Good plan. Could I also suggest a roll of silage sheet? We use this on building jobs around the cement mixer etc, it's very economical, completely impervious and stores well in a tidy roll. The best size is the 2m ish wide one that you use for the walls of a clamp.

I'm probably the most expensive in my area If you want to take logs uber seriously that's cool. Good luck to ya. I fail to see the point when we're at a tipping point re cost effectiveness compared to fossile fuels and the entry barriers to the log trade are so low. For me, it's easy extra cash when I get an order. It matters not to me about a bit of sawdust on the drive, the customer is too busy being engaged in cheery banter and having some gardening sold to them Quick question- are you in favour of increased regulation of the log trade?

A mate has a Silver 100.6. It has the turning circle of a dead elephant. Awful for loader work.

Simple- you decide that your profit margin is more important, and the 1% of customers that would complain can do one as I'm buggered if I'm paying for an expensive crane AND leaving them a £5 bag! Flip them off the side, take the money and on to the next drop.

Because some of us work smarter, not harder...

Proper job mate. Where's the grapple from?

How long is a piece of string? Seriously. If you've no experience whatsoever then you'd be best off cutting hedges and subbing a climber in when you need one.

There's a course IIRC. I was going to do it a few years ago but never got round to it.

It's the same story when it's wet too mate! Sandy or chalk soil = no problem, just whack the spoil back in. Clay can be problematic. If it's wet it just won't consilidate and can also cause problems with shrinkage when it dries out and gets wet again. I had good results using crushed chalk as backfill on some fairly damp clay. Cheap, effective and can be removed easily in future.

Essential: Driving license Experience operating excavators, ideally up to 13 tons. Grapple and timber handling experience a big plus. Chainsaw experience Experience of domestic and agricultural fencing, as well as basic landscaping skills. Must be willing to undertake basic garden maintenance with machinery- lawnmowing, hedgecuting etc. No weeding. Must speak excellent English. Nice to have: Experience working on difficult ground- slopes and bogs. Tractor driving experience Some workshop skills 34" DD, blonde hair Race, gender, sexual orientation unimportant, blah blah equal opportunities, so long as you muck in to get the job done. There will be occasional early starts and late finishes but generally we make every effort to finish by four. Start at eight AM. Excellent personalised PPE provided, all workwear laundering taken care of. Pay dependant upon ability. All staff receive a monthly bonus based upon the profit of the company Would consider a profit share if you are currently self employed, fit the company ethos and have something else to bring to the table. Call Ruben for a chat, 01730 815174

I've never broken a 1/2" one despite the usual punishments metered out. That said, my 3/4 set is a Kamasa one that I picked up locally from an add in the shop window.

Wolf. I have 6l, 25l and 50l. I bought the 2.5hp 25l for £90 the other day- nothing else comes close. They take some serious abuse too. I've had the 6l one for ten years, the 50l one under the floor in the workshop for 6 years and no problems whatsoever.

You don't need a wide selection of stimmer line- the Stihl round stuff is fine. I never have line welding save for the one bad batch of cord I bought. 2.4mm twin line on grass trimming. If that's snapping then you're doing something wrong, it's as simple as that. Thicker line is a clumsier cut and more drag on the strimmer for no benefit. I run the small heads like the FS-94 on FS460s with no issues. Thicker growth is best done with 4-way head using 3mm line. The stress on each bit of line is halved as the lines are doubled- make sense? Thicker than that and it's blade time. Shredder knife.

Yeah, a set is a good starting point. I had one from Screwfix. Have replaced the ratchet with a Halfords Pro and the sockets over the years have become mainly Silverline and Bositool as they've gotten lost.

Mate, you could have paid any ag mechanic £300 to fit you a second set of aux ports and a changeover tap by now. Stop faffing around and take the advice.

Sounds like you might as well have made it yourself. At least I expect my welding to be amateurish

Brakes are fine if you keep the rear adjusters fairly tight. Electrical issues can be the biggest problem but no worse than a Transit and considerably cheaper and easier to work on.

Stihl 2.4 is perfect for all grasscutting up to light brambles. If it's constantly snapping off at the eyelet, then you're not bumping it out often enough, it's flexing and fatiguing at that point and snapping. If it's gumming up in the head, then it probably just a bad batch. It happens. Despite all the stuff you read about soaking it in water, using talc etc, it's just easier to get a new batch. I've used twenty big rolls a year for the last five years and only had one that I had to throw away. Square line I'm not a fan of- it tends to gum up much more than round. Are you using square?

Correct me if I'm wrong, but isn't that a Chinese machine?? What's your day rate?

Might be easier to buy a tractor with a loader on it and flog yours.

Your best bet by far is an ex Army webbing belt with two 1l containers (also ex army) and three pouches. One for fuel, one for water and one for cord. The position of the pouches on the belt is adjustable to get a good fit leaving space for swinging the strimmer about.

I'd say so. Had Woodwalkers for six years and now Airstream for three years.

I hope you're gonna weld a brace in there before you paint it. Otherwise it's unlikely to last very long.