Jump to content

Log in or register to remove this advert

doobin

Veteran Member
  • Posts

    5,811
  • Joined

  • Last visited

  • Days Won

    16

Everything posted by doobin

  1. Sure the cutting gear and clutch is OK? I'd flog it on eBay for £100 and get a new MS181. 017 is a horrible little saw.
  2. If the digger didn't run it was more than 'a bit'
  3. Petrol in a diesel engine will do far more damage than diesel in a petrol engine. It will ruin the injectors, pre-ignite under compression and then trash the rest of the engine.
  4. Glad it's working for you, but root veg and sweetcord are not Paleo.
  5. Get some two stroke oil mixed in with fresh diesel. Petrol wrecks injector pumps, make sure there's plenty of lube for your pump to try to limit the damage.
  6. If you use an 18" bar then a 9t .325 sprocket is only a couple of quid and should make a big difference.
  7. What sprocket are you currently running? If you're not on a 9-pin in .325 then a saw of that size is bound to feel slow
  8. Any chain will be blunt in five minutes with volunteers. I find 1.1mm chain is very quick to sharpen, and quite forgiving of poor sharpening technique.
  9. Just the sprocket. If it's a spur sprocket then the sprocket is also the clutch drum. Why are you upping the kerf and dropping the bar length?
  10. They are all plastic. I've snapped one in half before.
  11. The oregon 1.1mm has bumper tie links. This is the type that I threw two unused chains away for as it was no good.
  12. You're worse than the Daily Mail for quoting out of context I said 'all you need for grass and light brambles Plenty of times I've extolled the virtues of thicker lines and more of them for heavier bramble type things, or blades for thicker stuff. But thick twin line is a waste of time on light stuff in my view.
  13. In 1.1mm gauge Oregon chain is rubbish. All the cutters snap off. Stihl is the way forward, it's strong enough to run on an MS250 with no issues.
  14. Offer of a strim-off still stands my friend. Lavant Church is looking a bit crappy, it could be our good deed for the month? Anyone up for a competition meet? Like a ploughing match but for sad muppets like me? I'm all about the right tools for the job. You change the bar on your saw according to what you're cutting, why should strimming be any different?
  15. Apparently it's a sealed head. Been meaning to pull mine apart to stick some more in. Stupid design.
  16. Do you mean the size of a car calipers? Loads of machinery has disc brakes and therefore calipers 'like a car'. They will not need particularly strong brakes as Merlos are hydrostatic drive, so 90% of braking is done via hydraulic retardation.
  17. If you mean 2.4mm, it's because it's all you need for grass and light brambles. Less drag and quicker cut.
  18. MS181 with 12" 1.1mm bar. £220 and worth every penny. Local conservation group have three and love them. Secondhand will only go wrong. Have new with warranty.
  19. Best to cut some thin rings off it until the hollow in the middle becomes solid timber and the metal is found/blue disappears. Shouldn't take that much, hard to tell from the pic if the hollow is a tear out from felling or rot. So long as it's still 8' long by then you should get a fair price if you can deliver. Though it may make more overall as firewood in your yard with no haulage costs. The local mill should tell you what length they want it if it's too big as one. Usually 8' for sleepers or posts unless it's high grade.
  20. If something has broken off, it would be most likely to be clunking about on all settings? Or intermittently. If you mean it's a really loud whirr, this is probably normal on high setting. Like when you set a car to max to demist the window.
  21. No problem. FS-90 is solid drive shaft so no danger of snapping it either, which is something you have to watch out for on smaller models.
  22. You'd need to plumb a new double acting spool valve into the circuit. This also means that to make the circuit you need a return- often a pipe going straight into a port on the back end of the tractor somewhere.
  23. Make sure you check the mixture when running a smaller bar- make sure it's not running too lean at the top end. I would just buy a new MS181 for £220 and have a proper sized saw for that job.
  24. It wouldn't cause any ecological problems. Only economic ones. Which as others have mentioned is what it all boils down to.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.