swinny

Long time since I've been. Shall have to re visit at some point

Rivet and stick on some ally channel now to uprights and bottom then drop in your ally planks? What I did

Try CLA insurance

Low plastic fuel tank too.

Only thing I don't like about the 40 series is all the electrics and switches etc, big filters and wiring all exposed underneath. That said I have just bought a turbod new Holland 7840 to replace the mf399.... In comparison thought he 399 has a fuel tank up top on front so weight over front wheels. Next to no electrics and nothing really on show to rip off. 40 series need some decent guarding underneath! I'm going to have to do something to mine for when mulching!

You going to do much road work at all with it? Seen quite a few older Massey's for forestry work

You talking in relation to the TM Matty?

Won't be long till I retire my tree Austria... Pretty poor that the buckles are brass and alloy etc... Having the latches on the buckles seize up constantly due to supposed corrosion between the surfaces where the latches are. Only just over 2 years old aswell Back to a full fat tree motion next. Had a TM light before and it was aweful. TM full fat was a great harness!

I've seen often wondered about them big old towable Vermeer grinders for this kind of work? You know which I mean?

Yes that and needing to reset pallet forks for bags, Ibc and then these crates etc.... Then they bust and drop nails etc. I try run a no nail yard lol ?

Banks are twats Steve. My only worry is you juggling cards but that's just me. Never had nor need a credit card. Could be the north south devide

Ha

Very nice! What's the specs? Be looking for a new yard next then John you be running outta room! Lol

Still looking thanks

Bumpy bumpy Who else is there? just been looking through my paperwork on my current firm and jeeze they want to know far ends of a fart. Going to try arborisk again at some point but remember that they wanted a wheel clamp on your chipper at all times when on site! Any other firms worth a shout?

Have we all got new tractors in the last few months lol. Just bought this to replace my massey. Just waiting on the loader being fit in next week or so.

You have to get those faces machined? Or new parts? New clutch plate obv

CMS Tree Services require a self employed groundsman for 2-3 days a week possibly more. We are based in Barnoldswick, Lancashire and mostly work local (within 20 miles from base) Ideally you would be within 15-20miles from us. We are looking for a qualified, self-motivated and enthusiastic new team member who would like to work in both the domestic & commercial sectors. All applicants should have and can demonstrate : Cs 30 / 31 and Cs38 essential 2-3 years relevant experience in ground-based work preferred Chipper ticket Good communication skills with both general public and other members of the team Must have the ability to work as part of a team Excellent time keeping A full, clean UK Diving Licence; you must be able to transport yourself to our yard on time. Good customer relations, polite and punctual. Always demonstrate a commitment to safe work practice. A committed and motivated person who is keen to learn and progress Being used to working with and alongside machinery and have basic maintenance / mechanical knowledge Be competent in rigging operations. We may also be interested in a climber from time to time. Must have up to date loler kit and minimum cs 30-31-38-39-40-41 If you are interested please message or email me at : [email protected]

Snapped off more like when stop bar on chipper clouted something lol

Anyone know the correct terminology for this part please? Output thread is M10. Operates valve block. Tried spool lever, spool block assy Cheers

Ian what's that screw splitter like on the little digger? Considering one for mine. Cheers Chris

Problem is with 300hp tractors is they weight 8-12t.... power to weight will be shite. then a fancy gearbox that will drain hp for fun. I know what your saying about wagons though. Is it just gearing at the end of the day

Cheers, I'll give them a bell tomorrow

Cheers, just had a look and no stat on there! Gutted. Good resource for service bits though thanks. I believe it to be a mitsubishi engine in this digger so might have to start searching that way. Cheers

I read it as you don't need to climb on two lines...... Can continue as is but need a back up safety line in. Safety line imo is for backup and decent. Not needed for accent.