Rob D

Yep for both Stihl and Husky mounts.

Yep you can have them instead of the pouch if you like But let me know just after you order and give me the order number etc... e mail on [email protected] is fine or PM me on here. Also what size! Am out of 3/16" at the mo...

Ha ha I bet! Last time I had a smaller selection of bars = could do a sliding scale from 3 months in. This time 3 months ago I still had most of the bars - so tricky to do a pre order offer when I already have the bars still in stock.

No prob but it's tricky getting the bars for the D033 mount even for the 9010 - can you change the bar studs to 8mm or better 9mm and then I think all the D009 bars should hopefully work.

No sorry - the offer is as is.

Just had a look up the Dolmar 133 - I think it has around 85cc to 90cc - hard to see how many on web. So you should be able to put a 28" bar on there fine as said above. This will work fine with a 24" Alaskan and yes you can still use this with the smaller 20" bar although you'll only have a cutting width of around 14". This Dolmar has a D033 oregon mount - do the mounting bolts have a flange at the bottom?

Looked good Rich - what did you do with the larger timber - looked worth milling...

Ah - love to get something like that set up - what sort of size lathe would you need in terms of hp? Got three phase in the workshop now.

Just bumping this for the weekend.... Quite a few ordered but offer runs for another week.

Sorry bout that - you need to put in 'arbtalk' as the voucher code to get your freebies... only way I know if someone is from here or not. But remind me next time you order and will try and make up for lack of this time. Also if you order a Sugi bar at the moment you get mega freebies! http://arbtalk.co.uk/forum/chainsawbars/74913-thunderbirds-go-new-sugihara-bars-due-3-weeks-pre-order-offer.html

Cracking! It's not getting the bit that's the problem - it's driving it! You need something very torquey to do it - what did you do it with?

The pre order offer is now up.... link here or go back to the chainsawbars sub forum. http://arbtalk.co.uk/forum/chainsawbars/74913-thunderbirds-go-new-sugihara-bars-due-3-weeks-pre-order-offer.html#post1124331 :001_smile:

Few things ref this shipment: No bars for the Husky T540XP - but possibly looking into adapting the Stihl light types to fit on this saw. Several new bars available - 42" pro solids for MS660 and similar and also a similar 42" for Husky 395XP New 10" and 12" R7 (very small tip) carving bars for the MS150C-E. Not as expensive as the Samurai bars - although still a detail only bar these should be stronger. Pricelist and bar finder attached on this thread - so you an download and print. Look just under the pictures at the bottom. All bars are uploaded onto the website here Guide bars If you order bars I still have you will still get the offer - you'll just get your order sooner! Jonsie will be taking a full complement of bars. So what's the offer then? And yes you get the appropriate offer with every bar you buy not just the first! No need to put in any code. Any bars bought before midnight Sunday 22nd June will be eligible. Buy any Sugihara bar up to 20" you will get a free filing pouch worth £15.73+vat and also a bar nose greaser worth £8.80+vat. Buy any Sugihara bar 20" to 36" you will get a free filing pouch worth £15.73+vat, bar nose greaser worth £8.80+vat, and pair sugi gloves (size medium - no choice!) worth £16.00+vat. Buy any Sugihara bar 36" to 46" you will get a free filing pouch worth £15.73+vat, bar nose greaser worth £8.80+vat, and pair sugi gloves (size medium - no choice!) worth £16.00+vat and 12v freehand grinder (either oregon or granberg) worth £35.00+vat and x3 packs of stones worth £16.00+vat. All bars can be found on the selectors here Guide bars Again - no need to enter a code just buy the bar (s) and this automatically mean you get the offer. :biggrin: Sugi price list June 2014.pdf

Yes I will! Order one off the website Matty - you will get the current offer - I'll put a link up to the offer on this thread.

Will be good to buy in the next 10 days - as the offer will be on from tonight!

Nothing for the T540XP on this one - nothing specific - there was confusion over what mount this was and delayed it until it was too late! But am looking at whether the Stihl bars can be run on this - the slot is the same, the oiler hole looks in the right place. The tensioner holes look larger on the Husky mount - but need to check to see exactly how large the tensioner is.

Not sure about that one - got an unusual mount... possibly on the order after this one...

Could have these coming from GB bars at a better price then the Granberg ones I currently have... Will be updating soon(ish) - they are on order I just need to make sure the mounts will work with a 660 type mount.

What was the part number of the bar you bought? As said above some bars oil through the tensioner hole - sounds like you have one of these. Not a faulty bar - just the wrong bar!

Sorry to hear about the break in Geoff - sounds like you're dealing with it fine but if you do get stuck and need to borrow gear etc don't be afraid to stick some requests up.

No - not doing any shows this year - but FR Jones will be there. I am doing a poster to show available bars etc but that will not be ready for the arb fair.

Sorry only just seen this - I'll also copy as a PM as well. I've just had confirmation that the bars are now on board ship - expected in at end of this month. Have got 'in my head' what the offer will be on Sugi bars - so watch this space as this will be live in a couple of days. You can place an offer then/now - as all pre orders will get the offer.

Ha ha - you sell more stuff on here than the retailers Jon! I'm sure you'll sell it fine - I still have your skidderoon - got a load more on order but need yours to do a couple of pics and vids.

Actually just realised I slightly hi jacked this thread although in Jonsie sub forum! So just to mention that Jonsie has a full complement of all the Woodchuck tools in stock. He will no doubt be taking to the shows this year if you want to see them in person.

Pleasure Al - it was a pretty hefty order you put in there and also being an arbtalker.... freebies included with pleasure. NB: If you order off Chainsawbars ? chainsaw chains, chainsaw bars and chainsaw accessories simply put in the word 'arbtalk' as voucher code to get some free throw ins.