Jump to content

Log in or register to remove this advert

Tiny echo!


Maxnaggle
 Share

Recommended Posts

Put my CS2511 TESC thru it's paces this week. When I unboxed and assembled it I noted the Echo branded carving bar was very swanky looking and is .50 gauge. I ran it up and immediately felt/noticed resistance and the bar tip 'blued up' with excess heat so I had to really slacken off the chain to the extent it was hanging off the bottom of the guide bar, this to me renders the cutting gear as 'unsuitable'. The saw was oiling generously so no issues there that I can see, however I did not try adjusting the oiler. I swapped out the echo C&B in favour of the stihl MS 150T C&B which is the smaller .43 gauge as this has a nose sprocket as opposed to the Echo solid nose bar which I suspect was the cause of the overheating. I also cable tied 2 small covers as I had them come adrift on the original 2510 seeing as the 2511 is near as dammit identical to the earlier saw and I don't wanna be losing covers. I also added a loop to the tool clip fir extra peace of mind.

 

5e27f02a564aa5e825e9862a3ce75168.jpg

 

Sent from my SM-A300FU using Arbtalk mobile app

 

 

Here ya go Fred, I added this short loop to the hand grip to assist the stock tool attachment ring.

Link to comment
Share on other sites

Log in or register to remove this advert

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.