Jump to content

Log in or register to remove this advert

Chainsaw lanyard


Mark Bolam
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

2meter length of old climbing rope with a fishermans knot on both ends with karabiner.

 

1 karabiner on the tool ring on the t540xp and the other end clip on to the middle tool ring on the back of you're harness and large caritool on the right hand side of your harness ,, works for me :)

Link to comment
Share on other sites

2meter length of old climbing rope with a fishermans knot on both ends with karabiner.

 

1 karabiner on the tool ring on the t540xp and the other end clip on to the middle tool ring on the back of you're harness and large caritool on the right hand side of your harness ,, works for me :)

 

+1 Used the same set up for ages.and if you cut your lanyard its less heartbreaking..

Link to comment
Share on other sites

+1 Used the same set up for ages.and if you cut your lanyard its less heartbreaking..

 

 

I've use improvised tool strops made out of climbing rope before. But am I right in thinking that in the event of a saw getting trapped in a cut it could potentially pull you out of the tree? Another climber told me of an instance where this has happened.

Prefer the bungee type strop myself.

Link to comment
Share on other sites

I've use improvised tool strops made out of climbing rope before. But am I right in thinking that in the event of a saw getting trapped in a cut it could potentially pull you out of the tree? Another climber told me of an instance where this has happened.

Prefer the bungee type strop myself.

 

 

Your attachment point on your harness is supposed to be weak and the point on the saw also. Think it was more of a problem when using back handled saws on old school harness's

Link to comment
Share on other sites

Unless it is a new treemotion.

 

Unless I am mistaken the tool ring at the back is now Green and rated for life support. Could be a problem on bigger saws with no direct attachment point apart from the handle. Also a large saw it more likely to be taken with falling timber.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.