Jump to content

Log in or register to remove this advert

how many phone lines have you broken?


justin131
 Share

Recommended Posts

2 to date. Have plenty wire and connectors to do the repair at the pole boxes now.

Both though had been joined halfway along. "We don't join them" said the BT man. Yeah, right. So explain the perfectly finished ends at both sides of the break then. Both times!

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

4 I recon .... Last one I've broken had been so rubbed through that removing the branch supporting it caused it to fail, just coiled it up and left it on the pole.

Had a lime tree quite a few years back that had a junction box and loads of wires through its crown one had grown over a wire and I did not realise ,tip rigged it and trying to pull it up and over in to the only gap in the crown it gave up very easily again due to been partially damage , client was happy the crackling on her line stopped ,I was not with the bill!

Trimming a leylandii hedge with man flue I had a sneezing and coughing fit at the top of the steps using a long reach cutter the fit stopped and I reached up on full revs and cut straight through the wire I had avoided probably ten times before! Just joined that one with a coat hanger coiled as a tensioner mid line, it was still there years later.

Think I did one with a cherry picker basket as well after it got caught raising street trees.

First one I ever did though was fresh out of college and was told to finish off chogging down a big beech stem that the crew had spent the previous day dismantling and it turned in to an embarrassing learning curve.

 

Turned up to an emergency call out in the dark with an ivy covered mess blocking a road ,hadn't realised it had a phone wire through so chipping up it must of ate quite a lot before we found a wire hanging out the back the machine, finished the job and spent a good few further hours in the dark and cold trying to retrieve wire off the fly wheel shaft.

Link to comment
Share on other sites

Not one yet, straight out of college I felled a top out a ivy invested oak which caught on the ivy and caught the line but it didn't break they can take a good hammering before they break!

 

 

I find that it's when you start to think that you push your luck!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.