Jump to content

Log in or register to remove this advert

Fings wot broke


aspenarb
 Share

Recommended Posts

Log in or register to remove this advert

My 372 went bang today so got to fit a new pot and piston, at the weekend i snapped the frpmt halfshaft on my offroader so been taking the front diff apart if only i could find a replacement half shaft! [ATTACH]190766[/ATTACH] [ATTACH]190767[/ATTACH] [ATTACH]190768[/ATTACH]

 

That pistons fried properly:laugh1: Whats the diff off of?

 

Bob

Link to comment
Share on other sites

Mog is in for a new clutch which means engine out through the front. We don't have enough height to tilt the cab in our workshop. We've also found metal particles in the fuel filter which ain't good. It's going to get a thorough overhaul while the engine is out. ImageUploadedByArbtalk1443621299.737372.jpg.5ed5ba9e17e07693e18db445b54bfc02.jpg

ImageUploadedByArbtalk1443621262.257047.jpg.8fb1055a0212bd1743c21d0e63aff95b.jpg

Link to comment
Share on other sites

  • 3 weeks later...

The boys have given the 13ton Komatsu a bit of a battering on a very rough hilly 20acre rake and burn job in Oxford, definitely broken :thumbdown:

 

image.jpg1_zps8abwxhyp.jpgimage.jpg6_zps2zvu5c1e.jpgimage.jpg4_zps5ydi2fxs.jpgimage.jpg5_zpsru6asxrt.jpgimage.jpg3_zps1hg6tevb.jpg

 

George our one eyed painter optimistically ordered a tin of touch up paint :) Clock the code, its been done on a spectrum analyser so should be spot on for Komatsu

 

image.jpg1_zpsfju3yv4n.jpg

Edited by aspenarb
Link to comment
Share on other sites

The boys have given the 13ton Komatsu a bit of a battering on a very rough hilly 20acre rake and burn job in Oxford, definitely broken :thumbdown:

 

At first i saw the rake and thought nothing a bit of weld wont fix.....then i saw the rest of the machine. What did it look like before? Looks like its taken a beating and then got beaten again.

Link to comment
Share on other sites

  • 2 weeks later...

All fixed :001_rolleyes: Our one eyed painter has done well.:thumbup1:

 

image.jpg1_zpsiet2zquo.jpg

 

Chippers have had a bit of a hammering this week

 

Something made an exit through the side of the chute

 

image.jpg2_zpsba4iyxfk.jpg

 

and the little tow along has been reversed into something , also looks like its had a jackknife :thumbdown:

 

image.jpg3_zpsq9xqnxji.jpg

 

image.jpg4_zpsbdranyjs.jpg

 

image.jpg5_zpsroeq98mf.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.