Jump to content

Log in or register to remove this advert

Phone lines through crown


Kenty
 Share

Recommended Posts

Tying them to the trunk or throwing a line over and pulling them away from the tree often helps.

 

At least these days the wire is very strong and more likely to pull the barge board of the house than snap. In the past they were a thin twin wire, much like the wire used for door bells, that stuff would snap if you gave it a hard stare.

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

Many years ago I carefully dismantled a Beech with several BT lines through it, one of the lines was a huge span with tree conveniently supporting the middle of the span, once the tree was just a trunk I lifted the longest line out of the crotch where it was sat and released it, it promptly dropped like a stone, pulling out the single corner brick it had been attached to, the brick hit the floor, pulling the line off wall down to the point where it enter the house downstairs. The brick was covered in cobwebs so had obviously never been motared in correctly. The line remained connected.

 

A mate had the same experience! Except the loose brick was in the chimney. Brick came out and chimney fell through the house. I think the phrase 'oh bugger' was muttered!

Link to comment
Share on other sites

Always carry Jellyblocks in truck and reel of cable:sneaky2:

 

They were (informally) issued to us in 87 after the storm. In those days the anchor at the house end was often an eyebolt to which a wrap guy lashing was attached. This lashing wrapped round the incoming wire and took the tension, the loose wire tail was then joined to the house side wire by the jellies. So it was often possible to undo the old jellies and unwrap the lashing and lower the wire. It was important to connect the two wires the same way round or it fooled fax machines, much may have changed over the years.

Link to comment
Share on other sites

Ive never had to fix one yet but. Screwfix and the like do telephone line tools and fittings. Surely you can fix up if needed. May be better to take photos before you start the job to get colours worked out first. £200 is a rip off.

 

Jenga chimney stacks. A whole new arb game!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.