the 'todays job' thread

[Gray git]

Yes and the hole it left went 6ft up and 3 down and could see daylight from op side from a few old wounds.

[josharb87]

Great kit Gray Git!

 

I didn't think the tree looked that big until i saw the last pic with the person by the stem!

[Rich Rule]

Same here Josh.

 

I thought I didn't look too bad until the pic with the RB and MEWP for scale.

 

Good work mate.

[Andymacp]

 

A few Elm stems picked up today by Big J. Biggest was 6-7ton

[Gray git]

Great kit Gray Git!

 

I didn't think the tree looked that big until i saw the last pic with the person by the stem!

 

About 60" across the stump, glad I'm not grinding it!

3 rb loades and 2 trailer loades of chip but to be fair we did chip just a little more than normal just because we could. 😀

Not entirely sure how much the hiab my mates sending tomorrow for the big timber can lift so could be an interesting day.

[Rich Rule]

How quick was the chipper filling the RB?

[Gray git]

About 15 min with brash which is half what it's capable of on bigger timber which is around 1m3 per min. It was handy that I could stack stuff up and keep bringing stuff to him with the digger which probably speeded it up as we didn't need to keep repositioning.

[Taupotreeman]

 

Haven't posted for ages in here but finally got chance to take some photos today after I was reduced to setting up road control while a contractor came in to knock over some trees for us. Treescape came down with their 18 inch and the 8 tonner. This tree took 1 hour ten minutes from go to site cleaned and road open. Took us longer to set up the traffic management than it did to do the tree. Much as I have a beef with the company itself; the guys are an awesome bunch and it was a pleasure working with them.

[Steve Bullman]

thats good going mate!

[csservices]

Had a look over this big old ash today, it's part of a site clearance, so much clearance under the roots I could crawl in and trunk is rotten enough to stand up inside it.