Jump to content

Log in or register to remove this advert

csservices

Veteran Member
  • Posts

    1,572
  • Joined

  • Last visited

Everything posted by csservices

  1. Did one site clearance where the bushes and ground in one area were liberally covered in discarded knickers and used condoms, apparently it was where the locals took their lady of the night. Another site clearance found a car gearbox with the forestry mulcher, that made a row [emoji1]
  2. Do the heater blowers blow hot or cold when the temp gauge goes up?
  3. Agreed, the main fallout over red diesel came about with the introduction of fast tractors, fastracs and mogs for example as people were running them as a get around to running a lorry for local haulage. But as an ex agri contractor, I agree the costs as detailed above means there really is no saving to be made.
  4. My original reply was posted tongue in cheek although I do know of two scenarios where it happened, neither are related, one involved a friend of mine who was running a mog at the time and had used it to take his compressor to a job to do some sandblasting, unfortunately it happened to be the same day customs and excise came to dip the wagons at the yard he was working, lost his mog, fine and back tax, the other was a agricultural contractor running red for gritting contracts same result impounded tractor ,fine and back tax. With regard to your transit scenario, this could happen with any combination of vehicle and I don't own a transit 😉
  5. Until Tom gets pulled by vosa on his way back from a domestic job has his tank dipped, gets his tractor impounded and then gets screwed by HMRC for back tax on the red diesel they decide he's used over the years as he was doing non agricultural work and should have been on white.
  6. Morning all, I have a customer who is after a 40-60 cm diameter log, 1.8-2.4 m long to use as a bike rack if anyone has anything available, near Cromford, let me know and I can put you in touch with the customer, Thanks Ed
  7. I'm on it but haven't really bothered with it, only joined as got invited by a customer.
  8. AA quoted £208 for two vehicles but didn't ask for vehicle details online quote, couple others I tried said they wouldn't cover the landrover once I put the reg number in, presumably due to age, I know the NFU one automatically cuts off one the vehicle is over 20 years of age.
  9. You wouldn't come this far Bob, in the wrong side of Watford Gap 😉
  10. Evening all, any recommendations for commercial vehicle recovery cover, as I'm doing more with the digger and as the landrover is no spring chicken, I'm looking at getting some recovery cover, needs to be someone who will cover recovery of the landrover and trailer. Thanks Ed
  11. The firm, I worked for changed to Tp 175's just before I left, seemed good choppers, just little niggles, the toothed top roller means it won't always pull in the last twiggy bits on a branch, the lads used to not let it run down long enough for the roller to disengage so it then wouldn't start again without pressing the switch to disengage first and the bumpers are made of tin foil if using on site work. Produce smaller chip than the Jensen a we had before and with the exhaust being routed through the chipper chute it will pack it in the van, so you have to watch your load.
  12. Carrots are struggling, two different varieties and neither seems to want to go, tomatoes are flowering, cucumber is growing after a slow start, best of everything is the peas, tried them in tubs this year, the two tubs that got left in the greenhouse have a good crop of pods already, the ones outside are about a fortnight behind.
  13. Doesn't matter who wins, this country has apparently become so whiney, that whoever wins the ones who lost will piss, moan, whine and draw up a petition to have another go til they get the result they want, at which time the other side will probably do the same and so on and so ad infinitum.
  14. This mine done about 3 years ago 👍
  15. Buggerit I had another 58 pages to read on that thread as of breakfast time just to get caught up again.
  16. Haha, hope not, bit out the loop as not done much tree wise last couple years so my usual suspects are otherwise engaged.
  17. Cheers Joe, the usual suspects up this way don't seem to want any work.
  18. Afternoon all, did post this in the employment section a while ago, I have now had confirmation to go ahead with the job, so I am looking for a climber for two days work, either between 5th and 10th of June or 13/14th June at latest, if anyone's interested pm me or call Ed on 07974 197820 thanks folks.
  19. Always helps if the stumps been left higher to give leverage, dig a ring all the way around the stump, may have to go a way out to get away from the thickest parts of the roots, use smallest bucket you've got so so you can dig between the roots, rocking the stump will show where the roots that are still holding are, if you can clean round them enough, you can then axe or saw them off and wriggle it again to find the next.
  20. Closest I've done to any tree work for a while, had put two days on it to allow for trailering away the brash, when got there customer had cut it all down and decided were hiring a small chipper to clear it themselves, so I just had the stumps to dig out, even going steady had them out by 2pm, steady Saturday 👍
  21. Removal of some laurel stumps today as they were to close to a new extension, got to go back in couple of weeks to scrape off and dig footings.
  22. 10 series fords are brilliant, the later x block engines are the ones to look for it was the earlier smooth blocks which were more likely to go porous and with the column change gears there were two types, the earlier "rubiks cube" ones were a pain to operate but the later version was better, but the standard floor mounted were better, if you find one with dual power that is really handy, it splits each gear down by half a ratio, very handy when towing or mowing etc.
  23. Ok slightly forward planning, but I will require a freelance climber for two to three days in June sometime potentially, work is clearing fishing pegs on a river bank, so may need rigging/lowering, all arising staying on site as brash and I can take mini digger on site to help extract any larger pieces from the river, pm with a day rate if interested so I can get a price to the fishing club. Thanks Ed

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.