Jump to content

Log in or register to remove this advert

Burning Lime wood.


coppice cutter
 Share

Recommended Posts

Let me say first of all that I am firmly in the "anything dry will burn" camp therefore I've burnt Alder, Leylandii, Elderberry, Willow, and all sorts in the past with no issue.

 

However, lately I've burnt my first decent bits of Lime and it does seem particularly hopeless. It was cut two full years ago, it's been covered, plenty of airflow, and wasn't especially thick to begin with. It behaves as if it's still not properly dried, a bit dead and smouldery, but the Willow and Alder cut at the same time and treated the same way is fine.

 

The reason I'm asking for other peoples experiences of it is firstly, is it something that needs a particularly long drying time? But secondly, if it's just an especially poor burner, in future I'll probably just confine the cutting of it to whatever is necessary for thinning and put my coppicing efforts in to something a bit more worthwhile. They're lovely trees and the leaves are nicer in a salad than any lettuce you'll ever buy, the regrowth from the ones already cut is also very healthy, but the burning experience so far is not impressive!

 

All relevant experiences welcomed.

Link to comment
Share on other sites

Log in or register to remove this advert

When I'm unfortunate enough to obtain willow, poplar or lime that's too big for the chipper and needs to go for firewood I put them in the softwood pile.  I hadn't noticed that lime was any poorer than pop, say, but it's certainly not great as a firewood

 

Must try the salad thing 👍

  • Like 3
Link to comment
Share on other sites

I treat it like softwood. Find it dries well and burns fine - just goes hot and quick like softwood. If the bark looks like it's coming off easily then I'll pull it off. Lime always seems quite wet when green so perhaps this has helped mine dry quicker.

 

I'll keep a bit if it's nice and straight but otherwise I tend to give it away as storage is tight for me.

Link to comment
Share on other sites

3 hours ago, coppice cutter said:

Let me say first of all that I am firmly in the "anything dry will burn" camp therefore I've burnt Alder, Leylandii, Elderberry, Willow, and all sorts in the past with no issue.

 

However, lately I've burnt my first decent bits of Lime and it does seem particularly hopeless. It was cut two full years ago, it's been covered, plenty of airflow, and wasn't especially thick to begin with. It behaves as if it's still not properly dried, a bit dead and smouldery, but the Willow and Alder cut at the same time and treated the same way is fine.

 

The reason I'm asking for other peoples experiences of it is firstly, is it something that needs a particularly long drying time? But secondly, if it's just an especially poor burner, in future I'll probably just confine the cutting of it to whatever is necessary for thinning and put my coppicing efforts in to something a bit more worthwhile. They're lovely trees and the leaves are nicer in a salad than any lettuce you'll ever buy, the regrowth from the ones already cut is also very healthy, but the burning experience so far is not impressive!

 

All relevant experiences welcomed.

Don’t bother burning lime, sell the best bits to sawmills.  Always good demand for lime.  I buy poplar as well, but not willow.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.