Jump to content

Log in or register to remove this advert

The unexplained


Steve Bullman
 Share

Recommended Posts

Log in or register to remove this advert

9 minutes ago, Doug Tait said:

Hit the fence he attached to it years ago so couldn't finish the lower cut, ended up going higher...

Is the sign just stopping anyone falling over the props? Doesn't seem to be doing any supporting 

The hedge on the other side of the road was flattened so I think the trunk sat up after they removed the crown

  • Like 3
Link to comment
Share on other sites

11 minutes ago, Doug Tait said:

Hit the fence he attached to it years ago so couldn't finish the lower cut, ended up going higher...

Ah yes. I was thinking first cut higher and then gave up trying to make the second cut but that makes more sense.

 

Then worried how much wood is left so made a completely half arsed job putting in props. Luckily it's pop so will rot away before anyone comes close.

  • Like 1
Link to comment
Share on other sites

I'd trust most farmers to know the basics of compression and tension. But there's no de-compressing undercut on top. We'd expect from windblown so most likely an amateur.

 

If it's ash and had dieback then there might not have been anyneed?

 

If I was a poor farmer with a small unreliable saw with a view to heating the hearth this winter then I could see why the base cut was made. The butt will start to season, the sign warns road uses of a hazard and the after-thought props are a feeble attempt to keep it off the verge.

 

Of course, this is only tongue in cheek guessing :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.