Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

Posted

Apparently the big sequoia often shattered when they fell, and the Giant Redwood timber was not highly regarded so the whole exercise was often pointless.  Coast Redwood is far superior, but the Giant Sequoias were largely felled for the hell of it according to my books.

Posted
  On 17/01/2022 at 20:20, topchippyles said:

Wonder how many tree guys on here would have cut it back then. 

Expand  

Even if we wanted to, where would we start?? The big one looks to be fifteen foot across, if we take the guy to be five feet tall (people were shorter back then). I suppose with a seven foot bar on an 880 it would be theoretically possible to get the cuts to meet up. If it was wider than 14" then you'd have a chunk of holding wood in the center that you'd have to bore out through the gob side. I wouldn't fancy it. 

Posted
  On 17/01/2022 at 20:51, Haironyourchest said:

Even if we wanted to, where would we start?? The big one looks to be fifteen foot across, if we take the guy to be five feet tall (people were shorter back then). I suppose with a seven foot bar on an 880 it would be theoretically possible to get the cuts to meet up. If it was wider than 14" then you'd have a chunk of holding wood in the center that you'd have to bore out through the gob side. I wouldn't fancy it. 

Expand  

I mean using the old tools not an 880 with a 7 foot bar

Posted
  On 17/01/2022 at 20:39, Squaredy said:

Apparently the big sequoia often shattered when they fell, and the Giant Redwood timber was not highly regarded so the whole exercise was often pointless.  Coast Redwood is far superior, but the Giant Sequoias were largely felled for the hell of it according to my books.

Expand  

Yeah I remember reading about two guys business types over there who had a bet on for who could fell the tallest tree. You can bet it wasn't any use felling a 100m+ tree in the middle of the woods. Plonkers. 

Posted
  On 17/01/2022 at 20:55, topchippyles said:

I mean using the old tools not an 880 with a 7 foot bar

Expand  

There is a good majority of the industry that can't use a rake properly so I'd say the likelihood of them using a crosscut saw is slim

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Read more  

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.