Jump to content

Log in or register to remove this advert

50cc fuel injected stihl


ScotlandsTrees
 Share

Recommended Posts

Log in or register to remove this advert

I asked that question and was told by one of my Dutch colleagues that they were but it was not going to be fuel injected, I was also told the MS 500i ran very hot so the injection system was set up rich to cool the engine, this is why they are not very good on fuel consumption, which makes you wonder what the true emissions are.

  • Like 2
Link to comment
Share on other sites

2 hours ago, adw said:

I asked that question and was told by one of my Dutch colleagues that they were but it was not going to be fuel injected, I was also told the MS 500i ran very hot so the injection system was set up rich to cool the engine, this is why they are not very good on fuel consumption, which makes you wonder what the true emissions are.

Sounds a poor way to control engine cooling, more fins on engine castings or fan volume instead of paying in fuel! K

Link to comment
Share on other sites

Thoughy 500i had the best power to weight?

 

 

 

Remember this nothing came of it (the carbon idea)?

 

BLOG.STIHL.CO.UK

In late 2014, we created the STIHL Carbon Concept Chain Saw. This one of a kind saw is made from carbon fibre, titanium...

 

 

Edited by Stere
Link to comment
Share on other sites

1 hour ago, Stere said:

Thoughy 500i had the best power to weight?

 

 

 

Remember this nothing came of it (the carbon idea)?

 

BLOG.STIHL.CO.UK

In late 2014, we created the STIHL Carbon Concept Chain Saw. This one of a kind saw is made from carbon fibre, titanium...

 

 

It can have the best power to weight ratio and still be the most thirsty .

  • Like 2
Link to comment
Share on other sites

Thoughy 500i had the best power to weight?
 
 
 
Remember this nothing came of it (the carbon idea)?
 
Carbon-Concept.png BLOG.STIHL.CO.UK
In late 2014, we created the STIHL Carbon Concept Chain Saw. This one of a kind saw is made from carbon fibre, titanium...  
 

Maybe it should of. I haven’t bought a 500i but the ones I’ve seen are pretty battered already. I think the plastics a cheaper / thinner than on older stihl saws. Perhaps In pursuit of less weight etc etc.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.