Jump to content

Log in or register to remove this advert

Old Skool Cool


Mr Ed
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

We used to convert the 21" Sandvik saw to clip onto the fibre glass live line pruning rods. That way we could pole saw some 50' off the ground. I'm pretty sure I've still got a couple of sockets rusting in my garage somewhere.

 

Trouble was that the saw could bridge the gap between LV phases and cause an outage!

Link to comment
Share on other sites

When:-

 

Waterproofs were a couple of hessian sacks on the legs and shoulders.

 

Combi Cans were in steel and the fillers brass with gauze filters and rubber seals.

 

Chainsaws had no chain brake (A65)

 

People were taught to think instead of all the HSE blah blah.:001_tt2:

 

2A Land Rovers had a starting handle behind the seats for cold mornings.:001_rolleyes:

 

Red phoneboxes instead of mobiles that don't work in dark woods.

 

One could leave tools overnight on the worksite unlocked.

 

Burning as much brash as one wanted.:biggrin:

 

No road cones nonsense.

 

Paid the same rate at weekends.

 

Flasks that poured broken glass into a brew.

Link to comment
Share on other sites

  • 5 years later...

Bet there is loads of old photos kicking about in albums and that's the problem with us oldies that took photos on film 🎥

Bet there are a lot on here that never put a film in a camera.

Will have to dig some out and scan a few in 🤔

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.