Dan Maynard
-
Posts
5,016 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Dan Maynard
-
It does look good. Midline is nice but not something I'm doing all the time in the tree, whereas DRT/SRT switching I do all the time. That has a much nicer DRT arrangement than RRP.
-
The are below or in line with the raker when the chains travelling straight, but stick out when it's going round the bar nose. Idea is to reduce chance of kickback, problem is you need the bottom half of the nose to cut for cutting with a buried bar. Or any slightly creative cut in between branches etc. If you take a Stihl 1/4 pitch chain it has bumpers but not high, these Oregon ones are just terrible.
-
I have thought about .325, in the 18v not seen a sprocket but you can definitely get 1/4. I'm going to try Stihls 3/8 1.1 full chisel next as the Oregon chain it comes with has such big safety bumpers you can barely cut with the bar buried so I had to file them off.
-
My honda head bolts came a bit loose. Hadnt really started leaking as bad as that, but I just tightened them up and carried on. I would tighten bolts and see how it goes.
-
The JB weld high temp spud suggested is less than a tenner, ordinary araldite breaks down at less than 100C so probably worth getting the high temp stuff.
-
Different leaves, same tree!
Dan Maynard replied to organic guy's topic in Tree Identification pictures
Sometimes variegated cultivars just revert on a particular branch up in the canopy, maybe a break or pruning site but other times seems random. I guess this is a similar mechanism. -
I think the weight advantage is lost when once you put the battery in, but still it does look really tempting. If starting from scratch I'd go XGT, at the moment I've got 6 LXT batteries in rotation.
-
What am I doing wrong with these young trees?
Dan Maynard replied to Justin Peer's topic in Forestry and Woodland management
If you're restaking, may I suggest a few wraps of sisal rope rather than tree straps - loose O then across the middle to make an 8. No plastic pollution when they're done and they naturally relax and fall to bits rather than strangle the tree over a few years. Also cheap as chips. -
Sorry only just noticed you said planted two months ago. Planting a tree of that size is a big shock for it, so some signs of stress will be normal and you just have to hope it recovers. It's difficult to over water, the two things to aim for are a good long soak so the water goes deep, rather than frequent wetting the surface, and the fact you probably need to water all through the summer and maybe next year too. I like tree bags because you fill up with water and it slowly soaks in to the ground.
-
Looks like it still tied tight to the stake, cut those off for a start.
-
What Insurance Do I Need For Felling and Groundwork?
Dan Maynard replied to handymidi's topic in Insurance Forum
Nit picking, the only exception is family member so if the child labour is your own then you don't need employers liability. In all practical situations you do though, of course. -
Shifting 80-100 ton sounds like a Justin Kingwell job to me.
-
All the time, yes. I have the 18v which gets used for hedges and reductions, and the 36v which gets used for brushing out on dismantles before switching to petrol for chogging down. Not as fast cutting as a 2511 but that isn't the only important parameter. Light, quiet, start on a button, no vibes or hot exhaust so you can put it down on your leg or in the hedge without it falling out. Likewise the Husky battery topper cuts faster but is a whole lot bigger and heavier. The Echo topper is light and powerful, but a lot more expensive and some have reported issues with batteries. The 18v needs switching to 1/4pitch, I have an 8 inch bar on mine.
-
I think you've got two issues - the cracks let exhaust out where it's not supposed to go, that's heating bits that are not supposed to be as hot. I'm not sure that will immediately cause a seizure but it's not helping - now that it's cracked, the cracks are quite likely to keep growing until the whole thing falls off. Result you're out in the woods with no exhaust, major pain in the neck I think you have to bite the bullet and replace. Is this one of the 462s you had for sale? I was going to say your saws are looking a bit orange and white nowadays.
-
They haven't said which October though.
-
You are right, it's a work activity. However if you are not employing anyone and no members of the public are at risk then health and safety laws don't apply. https://www.hse.gov.uk/self-employed/does-law-apply-to-me.htm
-
Like an MS400 then?
-
As I have these things with RRP wouldn't want to give them up. This maybe looks a bit smoother, but then again if you watch a video of RRP they fly around in a way that I don't.
-
I'd still say the hedgerow ash is not that bad round here. In the absence of more science I put that down to East Anglia being dry, and part of the life cycle being in leaf mould - worst I've seen was working in central Ireland last year, obviously a lot more damp on the ground.
-
'Eco-wedge', sell it for £6.99 with the loop, essential for sensitive sites where they make you use bio oil too. I can see the market.
-
I've heard of something similar, the oil flowing out the front of the cylinder is diverted in with the oil to the rear of the cylinder instead of back to tank. Benefit is faster travel, at the expense of available force. You end up with the effort of cylinder rod area rather than piston area, but for tipping down that would be fine.
-
Live in Edinburgh, Scotland - as opposed to all the other Edinburgh's it would be if you lived there.
-
12 foot here too, I've got Brian James though. Based on what people who have ifors tell me the ramps are easier and lighter on mine, and it tows quieter, so I'd definitely suggest looking at both. I tow mine with a 110 hardtop, so I've got the long door mirror stalks fitted to see round it, and then the extra trailer width is not really an issue. Keep thinking about a remap, especially when the trailers full. Always get there though, just need to be patient.
-
Beech? Conifer? Both? Or Neither? 😂
Dan Maynard replied to Matt.H's topic in Tree Identification pictures
HC my guess too, probably super light compared to sycamore as it looks dry already.
