Jump to content

Log in or register to remove this advert

Dan Maynard

Veteran Member
  • Posts

    4,835
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by Dan Maynard

  1. The only ones I've seen are honda engine which makes that a replacement anyway. No need to buy it from TW, mates have changed theirs and from what he said it was pretty straightforward apart from a bit of cut and weld to get the exhaust to fit. Less than a grand for the engine.
  2. I'm going for scam......
  3. So maybe rather than a surge in used sales, we'll see a surge in new sales before April.
  4. I would say no. As Fred Dibnah used to say you can only fall off a chimney once, you probably don't get a second chance to get your work positioning right so that you avoid a kickback injury in a tree.
  5. @shavey worth a shout - yes they are collectors items now.
  6. That's what I thought was going on, drove me nuts cleaning and cleaning it. Eventually it wouldn't start at all one day when I was out on a branch trying to rig a bit back over a satellite dish, had to use silky and decided either parts needed changing or it was going in the bin. Been absolutely fine since.
  7. Apparently also VAT not reclaimable on a car, so the double cab is going to be an even more expensive option after that. Looking around, it's been a subject for a while as HMRC tribunal ruled last year that vehicles with more seats are not primarily for carriage of goods. I'm just going to have to keep my defender hard top going, which I obviously only use for tree work. Car or van - What is a van for tax purposes? | PKF Smith Cooper WWW.PKFSMITHCOOPER.COM When an employer provides their employees with company vehicles for private use, the tax treatment...
  8. No. It's true that nobody is likely to come and stop you, but really it's unwise to carry on. Get some training. Learn about trees.
  9. Direct air supply to the stove.
  10. I was just thinking, plug in electric drills all used to be brushed as far as I remember but nowadays tend to have brushless battery kit so not anywhere near as common a job.
  11. They are brushes, yes. Generally they move forward under light spring pressure to take up the gradual wear, so as the brush gets shorter the pressure goes. Its possible they stick, bunged up with dust and dirt, but generally they are only a few pounds and so if there's a question put new ones in. Often come with new springs as well.
  12. That actually sounds a bit like my small Makita saw, I was pretty convinced the chain was dragging, it seemed to improve when I changed the sprocket. Luckily I have the 18v and 36v versions so was able to swap over parts from working saw, turned out the trigger switch was duff. Cost about £15 for a new one if I recall, L&S had them. It does look like your one in there.
  13. If you read the specs on the very cheap ones the update rate can be 1s, spend a little bit more and get one with 0.5s update rate.
  14. If you're working on other people's trees then the health and safety at work act applies, from which follow the work at height regulations, from which follows that you need to be competent, and the tickets are one way to show that. There's more, but it's all covered in the CS38/39 training. It's still worth working in other tree firms rather than just getting tickets and starting out on your own, there's a lot to learn about working efficiently and safely that isn't in the tickets.
  15. You'd better get some cod liver oil if you're doing another 18 years. Maybe a tin of waxoyl for the van too.
  16. I think Ukraine put a hole in the plan to stop the war by freezing borders at the current front, can't see Putin letting them keep part of Russia.
  17. I've bought some of this on recommendation here but not used it yet https://www.ryeoil.co.uk/shop/chainsaw-oil/
  18. Also, don't let the branch tear below as you cut - either hold it up or cut from below first.
  19. https://www.trees.org.uk/Help-Advice/Help-for-Tree-Owners/Guide-to-Tree-Pruning
  20. At 52, I'm all about the easiest way of gaining height. Always got ladders on - just bought those new, the old ones were worn out and rungs all coming loose.
  21. Yes, heat capacity can be the limit. The piece being lowered loses gravitational energy (mass x distance lowered) and this energy mostly ends up as heat in the portawrap and the rope. Lowering a big piece a long way will heat the bollard, letting it run lowers the peak force but the same amount of energy has to be dissipated overall. Safebloc will share some of the energy, and being aluminium helps it spread the heat away from the surface.
  22. Spoke too soon, love a wild area unless there's a bee's nest 5m up the tree. Abandoned that job for today, come back with a plan another day.....
  23. Always love a wild area!
  24. So Stormy Daniels could save the world from Donald Trump after all?
  25. I had that thought but was letting the more knowledgeable lead the way.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.