Dan Maynard

I've got the metal frame rigid ones, they're a bit of a pain to carry around but much more stable and durable than the three leg floppy ones. When the trailers full I just lay them on top of the chip so size not been a big problem.

My son is 20 now, as soon he could he started working in pubs as a waiter to earn money to spend on bikes, but lockdown closed all the pubs. As a cycling nut I suggested he started cycle repairs, now been doing that 3 years as a sideline to university and earns far more in less time, and it's much more flexible. He just started with local Facebook page advert, and Network Neighborhood posts. Fairly soon word of mouth spread and he has enough work. He puts a post up just before the start of each holiday and half a dozen bikes appear from nowhere. Go for it, just be honest and straightforward with people and do a good job.

Hey, welcome to arbtalk! To be honest I think I partly meant bit strange to get a review out of nowhere, but it is interesting to see how the narrow chippers are evolving. It seems to me for a while after release the CS100, Haeksler, JoBeau ranges didn't change much, then the Chinese chippers have swept through, now the European ones are evolving so I also noticed Haeksler have brought out some different hp models and also an electric drive, Greenmech have brought out the CS80, JoBeau seem to have tweaked models but not changed much. I would say M500 is absolutely the same category - narrow access , 12cm chipping, same hp as the Foxwood. Like you I do my own jobs part time, I see all the advantages of a narrow access chipper, save a lot of dragging etc etc. Price wise I guess it's the most expensive of the bunch being European built and hydrostatic drive but to me the drive is almost essential, makes moving it around safer and effortless. Thursdays job was bits and pieces round a sloping churchyard, would have been a right ballache dragging everything back up the hill at the end. Also 50cm blades are expensive but it means that any Y you can bend and fit in the hopper is going to go straight down and chip, this saves a lot of snedding.

M500s are up to 25hp now as well, he said in the video the biggest hp he could find was 18. You're right though, bit of a strange story/review.

Tell him I'll do it for £600. We had a song and dance over money last week, reasonable size job but customer has range rover and Bentley on the drive. Difficult to figure sometimes.

Depending where you are in the country, I would guess the late frosts burned the buds. Cross fingers and leave it be, cherry seem to sometimes just die so could go either way. Taking off deadwood won't make any difference to the tree but may improve the appearance.

Could maybe take some cuttings?

That's a good idea. Thing I'm thinking is if doing all that work to the carb made no difference then the problem is elsewhere, seems next most likely to me either scored piston so no compression or it's fighting an air leak.

Can't see any reason you'd add red, at least use green Super.

The US version of Ultra is a different animal, even different JASO rating. I seem to see lots of Ultra bashing videos but personally don't see the problem, I've run plenty and it's fine as have all the people who've run gallons and gallons of Motomix. YMMV as they say.

Have you looked at the piston?

What's the history of the saw? Did you buy it new or secondhand? The other recent 261 thread was resolved because the wrong flywheel had been fitted by a previous owner. If it's not fuel system then it's got to be something else, pressure vac and compression tests like @pleasant said earlier. Piston scored? Seals? By the sound of it you don't know it's making power at WOT just that it runs.

Is the idea of hydraulic drive to be more reliable than belts etc? I don't think I've ever seen FSI for hire, they seem to prefer cheaper machines and then move them on before going wrong.

Have you spoken to QRMS or Rotatech? They make pattern carbide teeth so if there is really a demand they might start this type. Other option maybe getting new tips brazed on the arms by a carbide tooling specialist but probably not be cheap. Or, what shape are they? Close enough to another brand to improvise?

Like it on my 461 though

I think it's probably right though, got asked today about taking out some conifers, asked about the stumps but said they weren't bothered about those. In a few years they'll want a new path by the house and landscapers will need to get them out.

I've got a ten year old 261, I suggest to never press the decomp button.

I have done this sketch just as putting the back on the trailer to go.. "Did my husband say to leave it like that? Well he's wrong, could you cut it down please"

Unless your mower is really old it's likely to be able to run E10, from the point of view of material compatibility. As far as I can make out the issue with ethanol is the absorbing water and separating out, this is terrible for 2T because then some of the liquid in your tank has no oil in. I guess on a mower or other 4T it will just cough and splutter rather than die from lack of lubrication. I just use Esso E5 in everything, and don't store in part full tanks.

He tells it like a love story but that might be closer to the truth....

I had a customer once, middle aged British guy working in a factory in Germany. Apparently age 23 he'd set off with a mate in a Landrover to drive to Africa, met some girls in Germany, that was it stopped there.

Sounds like something more fundamental wrong with the carb like split diaphragm or failed metering needle to me. Adjuster screws are the road to frustration if something else is wrong anyway so not the place to start. I guess you have to decide whether it's worth a carb kit+time, new carb, or time to retire it.

Don't Google hairy fairy either......

Just looking at Haughley park, wood fair event looks good on the website. Maybe have to come over next year, less than an hour away.

Hmm that's an interesting idea. Something gradual would give the tree time to react rather than just fall over.