SbTVF
-
Posts
628 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by SbTVF
-
500? They went on a real hot day when it'd been working non stop and everything was very warm. Hadn't replaced the belt housing filter for a good while either and had a chain oil leak so it all added to their early demise I'd say.
-
Yeah did it all ourselves, not a difficult job really. It all should slot out pretty easily if I recall correctly. Yeah replace anything you can like that while you're on. It's daft not to.
-
Well done! Nearly had a heart attack when they said the price for the bearings! Yeah, it's a tajfun part so no place else to get it!
-
Ours did similar, swapped out the shaft for a new one and did the bearings at the same time. Shaft was about £250? They went a second time recently but the shafts fine. Please tell me you didn't buy the bearings off Kilworth? They're a massive rip off. Same for all non tajfun parts!
-
North East. If anything the firewood market is stronger than ever.
-
If anything there will be more ash being felled due to it. There certainly is around here!
-
Almost, it's a fiskars log pick/pickaroon thingy.
-
Do Mts bobcat or similar have one? What's about CLS land services at yearby?
-
I've got 2 rows of pallets along the back in that open fronted shed. Barely a hint of mould.
-
At the bottom yes, the top half of the triangle will do better than if it's a rounder mound though I would think. I'm very pleased by how much that shed of ours has dried. They went in really quite wet and have come down considerably in next to no time at all.
-
You either need a telehandler or a conveyor elevator to make the most of shed height. Logs do pile up well if you've got the forward reach!
-
Store all our cages, 80 of them, in a windy ally between some sheds, they're down at 20-25%and only processed in June. Felled in February. These go in our kiln on farm 14 at a time. Once that's full we put loose logs in the 'lambing shed' ready to tip into the drying bin. Get about 70cube in there, need an elevator though and I'd get loads more in. Again cut about June/July and they've come down to 25% already even just in a pile like that. When the bin comes back we put them through the cleaner and bag up for storage.
-
3455x200x50mm dry oak board wanted for floating shelving, anybody got any or can suggest trying? North East England. Ta
-
We had northern power grid in on our small wood about 15 years ago but the wood had zero value so nothing to sell on but it was cut down, mulched with a big fendt and then restocked with variaties that wouldn't get as tall (dog woods and bushes basically) and it didn't cost us a penny. Even got a set of chainsaw boots off the climber for free that he'd barely used because he hated them so was getting another brand! So yes, make them do the leg work and get what you can for the timber at roadside afterwards.
-
Most suppliers do it in a 85x85x85 bag round here and are charging anywhere from £70 to £90 which works out at nearly £150 a cube based on the bag holding 0.6m3. We're at £105 a cube this year.
-
Aren't Kilworth are farmi dealer?
-
The sawmills at Masham, North Yorkshire had some loads of big oak from Rokeby Estate last year. They might be worth a shout
-
Nissan cabstar dropside with a cheap ebay swing hoist thing on the back for lifting bags off. Its economical and very nimble but hopeless in the snow even with proper snow tyres on! Hopefully I'll get a proper hydraulic crane on it for this season and and a driver so I can deal with things in the yard instead!
-
If he's already chipping on site he's already a self supplier I would think. He'll just need felling licence numbers etc for his records incase of ofgem audit.
-
Local, smaller dealers are a good bet. The condition of the seat, steps up to cab and general cab wear and tear are a good indication of how much the owner looked after it. I've seen immaculate 10,000 hour tractors and absolute dogs of a 4000 hour tractor. I know which I'd rather have.
-
I think I spend more time waiting for customer's to move their cars off the drive than swapping a few logs off the top of a crate now and then. It's not a huge issue in the grand scheme of things.
-
If that's the case, explain to me why the tajfun 11kw motor powers our tajfun 400 to exactly the same performance as the tractor does when it supposedly requires 35hp? I think the same motor does the 480 too with 25t split power... Ive run the processor for 6 weeks on less than 300 litres of diesel. I'd have refilled the 100litre tractor tank every 3 days.
-
We do do that amount but it's getting harder to get anything of a decent size. We usually just get whole trees, branches and all rather than graded loads so the size is heavily weighted towards the smaller diameter! Had 75t of sub 10" Birch in the stuff we've just done. Makes nice logs but slow going. My question was as much, why are they are fitting electric motors that can't provide equal power to the pump as the PTO pump can?
-
Don't do the volume to warrant it otherwise that'd be the first thing we did. Even if we spent the extra money on a tajfun 480 I'd still end up with almost the same amount of oversize to deal with. There are not many 16-19" logs in my oversize pile. Most of it 20" plus. But I'm only talking maybe 25t a year of over 16" in total currently. Thinking I'm better off with a vertical split so the straightest oversize can be billeted and put through the processor and the knotty stuff ringed and split on the table.
-
They'll shrink for a start but also making the most of the stacking/seasoning space. Usually use the extra to top up others or fill an extra if needed.
