Jump to content

Log in or register to remove this advert

better dayz

Member
  • Posts

    139
  • Joined

  • Last visited

Everything posted by better dayz

  1. So pellets are real bad, circa 10% and look how much oil was burnt to produce them
  2. Its abit like spilled milk really
  3. 52.55p 1200 litre
  4. I declared 10.5 cubic meters charged 7.50 bucks
  5. Must be an electrical engineer near you somewhere or even an agricultural engineer they generally don't like to be beat and have a wide knowledge
  6. Send it to Cornwall
  7. Had the same problem on a electric winch something about a faulty capacitor creating uneven magnetic fields which caused irregular rotation I'm no expert just what I was told
  8. Replace the capacitor
  9. Hilti tools have always served me well
  10. Stock pile get Jenkins in to chip sell them the chip get a cheque without lifting a finger
  11. Scorch one but don't kill it that'll see them off
  12. Cut the tree down
  13. Google came up with 30 lpm which I thought was low Most valves look like 60 lpm I guess pumping more than the valve rating is a waste and could case heat?
  14. Some are run with 3/8 hydraulic hose and some with 1/2" What is the max flow rate of a 3/8 and 1/2 hose? Presumably a small 3/8 hose will have a lesser flow rate per minute and slower to operate or am I missing the point?
  15. Water burns on an open fire??
  16. Thompson Plant Hire I think west coast but probably travel had a new Mus max at apf diesel engine
  17. Growi have a large x type splitter advertised in the forestry journal this month like a big kindling machine style
  18. You don't like to be busy and make money?
  19. Kelso racecourse Iam sure they do a bit of haggis racing there too, after dark usually
  20. Go ape at Aberfoyle is a good laugh. Maybe too far North
  21. cheers for that
  22. cheers anyone else?
  23. does anybody run a Kesla chipper? build quality? chip quality? back up from the dealer? thanks

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.