Jump to content

Log in or register to remove this advert

stewmo

Member
  • Posts

    583
  • Joined

  • Last visited

Everything posted by stewmo

  1. Thanks for help. Yes saw idles and revs well. Just when in deeper cuts loses oomph. Will get it looked at.
  2. Not sure what the fuel metering lever is, but i did start by wondering about the choke because it was acting a bit like the choke was still on, so perhaps you could be right.
  3. Wondering if this the problem (or another entirely?!!). Plastic looks damaged but I have no idea what it is?!
  4. Hi there Yesterday my saw was working fine in the morning but as the day went on coming down a redwood it was running out of revs. Normally if it's too much for it, the chain stops but revs still there. Couple of times it nearly cut out all together. I really had to nurse it home and finish the tree. Opened up air filter to see if choke still working ok and there was a fuel all over it and the carb. Any thoughts? Hoping it might be obvious to someone what's up?! Thanks :-)
  5. Hi Adam Why do you use the pinto pulley on your main line - is there is a real advantage over a running bowline or a ring? Cheers
  6. Yosemite is one the top places I've been in world including Himalayas and Andes. Very special place with some awesome climbers to boot! Don't think you could the solo the Dawn Wall. But who could have said Honnold would do what he has done. But the guys that did this climb are supposed to be very accomplished climbers and they both fell many times to complete the ascent.
  7. I like the all action vids, but there was one recently - a quick dismantle of a conifer - and it just had a few knots and work positioning bits mixed in and I actually really liked seeing how people do that. So lets have the limbs crashing down, but also show where the skill is in tree work - getting a good work position and how to be safe and secure in the cutting. These would be great vids to share techniques. There are plenty of big tits on youtube
  8. Agree with that. It's all short term vote grabbing nonsense nowadays.
  9. Yes it is a challenge to (and for) all of us to get to grips with, but as I said earlier we're all hard to change. Plus it's a drop in the ocean if I'm the greenest human being if all time. Change needs to happen at governmental level and policy put in place to guide us into ethical responsibility for what is essentially our only home. Thus Greens.
  10. Great. I'm actually quite up for all change. I live a pretty basic low impact lifestyle. But I also recognise that there are a lot of things I like about this 'world' and indeed rely on, that I would find it hard for those to change.
  11. I think the policies required to make a sustainable future possible on this planet would actually be pretty abhorrent to any of us. Which is why we continue to make a mess of things. None of us want to change really. The three central parties are only interested in smoothing passage for big business, why not try something different. Don't think they can be any worse.
  12. Jings! Glad everyone ok
  13. Definitely easing off now but pretty wild last night in Devon. Think we got it easy though compared to everywhere else
  14. Maybe a stupid question but do all these Hitch Hikers come from America or is there a UK supplier??
  15. I am quite happy footlocking, mainly because you are using two legs at once - hadn't heard of the detrimental effects on the body....just wondering about pantins - as everyone seems to rate them so highly
  16. Hi folks, I was watching a vid the other day, with a guy ascending ddrt for the first ascent into tree. Using a prussic around both lines, very smooth as its like SRT, and he was foot locking. I was wondering if anyone has done this with two pantins instead of the foot locking? Seems like the easiest way to enter the tree ddrt?
  17. +1 for trying new knots out on your lanyard before mainline. I learnt on blakes hitch and so tried a VT and micro pulley on my lanyard for a while, and then a Distel. Realised I preferred the distel, it felt more reliable than the VT for me. Then I added a micro pulley under the blakes on main line and that was good for a while, but got annoying as it tends to tighten up too much and needs adjusting. So then I put a Distel on the main line and it's great. Next is to swop the micro pulley for a HC. Once the HC is familiar easy to move to SRT by adding RopeWrench.... Then I guess go mechanical!
  18. Ivy often roots into some branch unions, so cutting at the base isn't always effective at killing it off. Good to clear if trees are exposed to wind but otherwise it is a good habitat and source of food for birds. But don't let the ivy dominate the tree.
  19. I know a fella that uses a Husky 365 all day long for felling.
  20. If you're are worried about the sling slipping off one side of the backbone could you not girth hitch it onto the spine too? Bit longer to setup I guess but def not going anywhere then! Great vid!
  21. I've got a spare full chisel chain - would that be ok? Or micro chisel better? Also Rob I'm sure I've seen you write that you file the Granberg all at 10 degrees - if so then I'm assuming that it probably isn't any more time consuming to maintain than a standard chain...is this so?
  22. Ok I did and boom! Simples
  23. Hi folks, Trying to remove the clutch on my 200t and its pretty stuck on there. Have used starter cord as a piston stop and using a 13mm socket to turn the clutch clockwise (its a reverse thread no?) and it won't give. Guess i'm worried about going too hard at it, so er WD40 or what? Help gratefully rcvd!
  24. That's what I thought. Guess that its either the Granberg or file a standard chain to 10 degree....

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.