Jump to content

Log in or register to remove this advert

crobinson

Member
  • Posts

    28
  • Joined

  • Last visited

Everything posted by crobinson

  1. Try Mick Waldram [email protected] 07721 618899 Based Leicestershire
  2. Thanks - i use Danish on most things, but didn't think it would make it dark enough for what we want. Would the Osmo seal over a wax - or do i need an oil stain?
  3. Hi All, I've got some lovely 2 1/4" Ash for a new worktop for a bathroom - the sink will be a freestanding bowl to sit on top of it. I'm also going to make some floating shelves out of the offcuts once the worktop is jointed. What is the best treatment to seal it from the moisture? I want to stain it slightly to fit with the darker beams and floor, but then seal it - ideally with a matt finish. Many thanks,
  4. Yes, those exemptions still apply, although you can only sell 2cu out of the 5. You'll either need a TPO permission to carry out the work, or an FC approved management plan, which will take care of this for you. I guess you haven't got a management plan as this would come with a felling license.
  5. Be careful with existing woodlands. Farm Woodland Premium Scheme prohibits grazing of livestock on ex-agricultural land now planted with woodland. Even though the payments stop after 15 years, the obligation period is 30 years. Make sure you don't have any grant schemes which prohibit grazing before you start.
  6. Suits & House of Cards (Netflix)
  7. Hi, I know a friend who had one fitted - A clearview 400 and lined chimney with new hearth came to £2,500. So about £1,300 without the stove. I'm about to put one in, but have to have an external chimney....sigh
  8. I put a few cuts in the top of a recently cut stump and poured some SBK on it. Haven't had anything come back 3 years later.
  9. HLS is pretty much no longer available - under the new NELMS scheme which will come into force Jan 2016. You'll be looking at: £9.40/m for hedgelaying - £4/m coppicing hedge - £9.50/m gapping up - £3/m Casting up - £4.10/m pre work - £3.40 top binding and staking (depends where you are in the country). NELMS won't be available to everyone everywhere, but there's a strong chance there will be capital only grants which could include hedgelaying. These should be more widely available than the whole farm schemes. Hope that helps
  10. Hi All, The National Forest has developed a new online marketplace for timber (standing and logs), products, jobs, machinery for hire or use etc. etc. Pretty much anything you want to advertise. Please take a look at the examples: nationalforest.org | Marketplace You need to be a member of the website to post adverts (Only a one off £25 fee). This membership entitles you to advertise your entire business on our directory. Any questions give me a shout at [email protected] Cheers, Charles
  11. At a quick glance it looks like Buckthorn to me - Deciduous shrub which will grow with vigour, will re-grow when cut back.
  12. Looks like drought damage to me. Leaf miner is as the pic above - much more blotchy and obvious where they have attacked. Few trees suffering drought damage this year - a number of concerned landowners reported Ash Dieback which is just drought caused leaf drop.
  13. Not the one my neighbours tackled - must have been something else wrong with it as it killed 1/2 our hedge - I assumed they hit it too hard.
  14. I had one for 2 years and did 80K (70K - 150k) miles with nothing but servicing costs + new fuel filter sensor (£15). Mine was a 2000 Series IIa TD5 - lovely to run, did about 35mpg average and was great on the motorway too. I had BFG Allterrain tyres on it. I managed to put it in a hedge in the ice, otherwise I would probably still have it.
  15. Sorry, my bad. Your right about Yew - It's when you take the saw too it that it doesn't like it.
  16. I've burnt a lot of alder as my woods are full of the stuff. I tend to split mine (fairly) wet and dry in log form for 10 months - burns a dream.
  17. Always cut bottom to top You can be more brutal than you think for a lot of species - beware Yew/Leylandi etc. if you take too much it won't grow back.
  18. Not all our land - looking at collaborative approaches across multiple land ownerships - same principle as deer management groups. Also the same principle that if one landowner managed the population, then it creates a pocket for neighbouring squirrels to move into. Anyone know anymore about the Goodnature traps from NZ?
  19. Work in The National Forest with ,000s Hectares of 15+ year old woodland and a lot more coming of age which is at huge risk. Deer less of an issue here, greys are the real enemy. Was just looking to see if the industry had anything radical which had worked. Thanks for very interesting replies. I note the mention of the NZ CO2 trap, currently under development for use on greys over here - could be 18 months... But will it be worth the wait, I hope so.
  20. A lot of time involved shooting all the time. Any experience with Warfrain/instant kills?
  21. Hi All, Take a look at this: [ame=http://www.youtube.com/watch?v=LM1TMsNnF98]Grey Squirrel Bark Stripping - YouTube[/ame] Anyone suffer bad damage this year? Any thoughts on most effective control methods? Thanks
  22. Cheap Drills Handsaws which aren't brand new Strimmer heads which don't release their cord Strimmer cord which snaps before you've even cut anything Metal felling wedges when you're using rookies
  23. Used one daily felling Douglas, Larch, Spruce & mixed B'leaves for about 2 years. Never had a problem. Great saw in my view, but I obviously had a good one by the sounds of things.
  24. Tung Oil scratches very easily - used it on my Oak kitchen worktops for a few weeks, then put Linseed on top for more protection. Tung Oil looked better (Linseed can be a bit shiny for my liking).

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.