broonie

silky europe contact details, you could e mail them and ask. Silky » Contact » Contacteren

Renauly Masters are the same

didnae realise you were that auld Stephen lol

My Renault Master developed a bad judder moving off, turned out to be top engine mounting goosed.

Fred Knott

I just subscribe to any thread of interest now , easier to find later .

Replacement Stove Glass and Custom Sized Stove Glass from Fastglass Direct used this company when I cracked mine.

de-cat pipe Exhaust Pipe Replacement De-cat for Ford Ranger Pickup ER24 - (ER/EQ) 2.5TD (12 valve) 1999->10/2007 (Inc European models)

Dusting Difflock can we get pics of you wi wearin yer pinnie and marigolds lol

In Angus all caretaker staff and drivers must wear safety shoes or boots.

I suffer from anxiety and silent stress(rumination- over thinking things) , my symptoms are swelling of the stomach and over production of stomach acid, take omeprazol daily to counter the acid problem and have slowly working through all issues that cause my stress to flare, mostly financial/business related.

planer?

you could always replace the solenoid if its goosed with a waterproof albright solenoid.

Mass USA based processsors - firewood processor- Woodbine Firewood Processors from CRD Metalworks

ton tattie box

last year a local guy was putting tattie boxes of hardwood out for 90 quid delivered

The Standard Sizes for Potato Boxes are as follows ; Length - The overall length is 1830mm Width - The standard width is 1193mm, although some customers have remained on the imperial 1220mm ( 48 " ) standard. Height - An overall height of the box varies from one customer to the next, but as a general guide the heights fall into three categories a ) 914mm overall. This box nominally holds 1000kg of potatoes b ) 965mm overall. This box nominally holds 1100kg of potatoes c ) 1070mm overall. This box nominally holds 1200kg of potatoes Variations of dimensions are possible, but must fall within the dimensional limits as set out in BS7611, further details can be obtained by request. Base - The base can be either an " open " type where the box tippler MUST support the top of the box during unloading, or a " closed " type where there are " box length " bottom boards, and can be used for example on a forklift rotator attachment. Gaps - Boxes can be supplied either " open " or "close " boarded. The prefered gap for openboarded is a nominal 26mm, other customers prefer variations down to 10mm, depending upon potato size and type. Closeboarded boxes are what they say, but we do prefer to leave a small gap approximately half way down the box to allow for swelling of the boards when the box is in wet conditions. from google

windy and intermittent showers here

Heavy rain earlier this morning now, sun is shining bright and nae wind:)

I had on mine twin alts, one for front winch twin batteries and vehicle electrics and one for rear winch with twin batteries and spot/flood lights ... just loved doing recoveries

Aye jist make sure your alternator and battery can cope Jon...

hope this helps

You can wire it so switches are in the cab... will see if I can find the wiring diagram

here ya go:001_smile:

Glamis castle 5 miles away