Stubby
-
Posts
32,274 -
Joined
-
Last visited
-
Days Won
141
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Stubby
-
When it use to be planted and harvested for matches ( Swan Vesta ) it was used because it burned slowly . They even coated the end with wax to keep it going so , not so sure about good kindling .
-
It is ( gold for me ) and I live in West Sussex !
-
Someone else wrote that !
-
Morning all . A lot of over night rain . Stopped now . 13c with a high of 16c .
-
He moves in mysterious ways
-
Its ok . They can be re cycled .
-
Reach out ....I'll be there ....
-
Morning all . Currently 9c , mostly cloudy with a high of 16c .
-
'Kin hope so !🙂
-
The ones that appear resistant need the keys harvesting to try and build up a resistant strain .
-
If its Nylon then yes .
-
I can do that with 2.4 line yes . However most of what I clattered down when working was a mixture of snot and vegetation that required a bit thicker kit than that .
-
Get in line !
-
Its shooting out a bit of epicormic growth which can be a sign of stress .
-
And so it begins ....again 😁
-
If you are going to use a modern synthetic 2t oil then mix it at 50:1 . 40:1 could be part of your oily residue problem .
-
Morning all . Clear blue again . 7c going up to 17c
-
You will need to soak it in a bucket of water then . Nylon is hygroscopic and will absorb water to prevent it becoming brittle .
-
Not the 4mm square Diamond edge line from desert extrusions . Very hard wareing .
-
I never use all 4 slots just 2 but use a 4 slot head as it keeps the nut below flush .
-
The above has been my set up for years .
-
I hit a can of gloss white paint buried in some tall vegetation once . Hell of a mess and put the blade out of balance .
-
Yes . I have seen some that look better that they did 3 summers a go . It seems very random .
-
I see plenty . Most in varying stages and some in the same row of trees showing no signs at all .
-
You need a carb kit and to re set the metering arm me thinks .
