Jump to content

Log in or register to remove this advert

Joe Newton

Veteran Member
  • Posts

    9,684
  • Joined

  • Last visited

  • Days Won

    36

Everything posted by Joe Newton

  1. Not yet, did have a 441 with aggressive rakers shoot out of a bore cut and drop me with a cock shot once..m
  2. Mate of mine put a 036 into his arm a while back, when I used it next there were chunks of him in the teeth, and the exhaust smelt of barbeque
  3. I have similarly coloured facial hair and its tempted me to do similar.
  4. Replaced my suspension after I cracked a leaf spring. Luckily my brother in law is a solid mechanical engineer, so this was child play for him.
  5. I know a company that way, mostly pruning work on mature prestigious trees in high amenity areas. If that's your thing I'll see if they're looking.
  6. Not really, its a ten inch bar. Not exactly difficult to make cuts with without pushing it on felling spikes.
  7. careful, ill be supervising you. Label's out Bolam!
  8. you know it's posh when they asked if you want pepper on your bacon roll
  9. Don't be fooled, he really is a twat.
  10. Roker Tree Services, in Verdes cafe, Long Buckby
  11. Good luck to you mate. Saw your card in Verdes and couldn't help thinking the only business you'll get from that is tarmaccers and council workers!
  12. could you not use freelancers to help take the climbing load off? A couple of guys I work for use me for jobs they could happily do themselves just so they can run things from the ground.
  13. You're missing the point Matty. If you smoke while up a tree, you will certainly die.
  14. Personally I think that having a cig in a tree is the most dangerous thing about climbing...
  15. they've covered this, its not a design fault, its YOUR fault...
  16. If you're good then you'll do fine, ring around a few firms near you for a chat and tell them what you're about. Arbtalk is a fantastic resource for finding work also. Use it. Provided you can do what you say you can you shouldn't struggle for work. You'll meet new people and see different ways of working, some good and some bad. Be prepared to travel a little bit for the right clients.
  17. I don't understand why anyone would. Throwbag on your climbing line will get you that far! Or ladders if you can swallow your pride...
  18. I had an 038 super on a 20" bar and it was a torquey lump of a saw. An 18" bar would run lovely. It was a dead simple job to replace the piston rings (I bought meteor ones, which are apparently a good make if you don't want to splash out for oem. ) Really easy and simple to maintain if you don't mind the extra weight and slightly slower chain speed.
  19. I'm running the 95TXL with the speedcut bar on my ported 357. Pulls an 18" bar easily. Fantastic chain. I wouldn't bother with the oregon bar though, its flimsy and easily bent. Sugi do a posh bar to fit the 95txl now which will be a much better option.
  20. This was brought up with stein on here a while ago when they were promoting a new version of the lid. They absolutely refused to accept that it was a design flaw and passed the buck to user error. Pitiful
  21. just re-read it, are we talking aerial pruning? There's no need for a 12" bar if so, get the 10" For ground work the ms180 is a great saw within your budget for the size cuts you want.
  22. £200 will get you 3 decent silky and change. If you want a decent pruning saw like you stated then spend the extra and get an MS150 or a 2511. Both excellent pruning saws. They cost around £350-400 though.
  23. fair enough, your kit probably lives in your van. I've got to unload and load mine twice a day so can't be arsed with two lines.
  24. you're right, it flexes between the crab and the tether. Needs dressing after ascent. Ill have to figure out a way to keep it rigid. I always experiment and end up going back to a hc. Why would you need a different rope?

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.