Jump to content

Log in or register to remove this advert

woody paul

Veteran Member
 View Profile  See their activity

  • Posts

    5,450

  • Joined

  • Last visited

 Content Type 

Everything posted by woody paul

  1. woody paul
    They will also tell you if it repairable, were as you will not have a clue.
  2. woody paul
    Big Eucalyptus across customers drive, they could get out via another drive but still needed it cleared. Just an hours work with little helper on site.
  3. woody paul
    Easy life.
  4. woody paul
    I've no idea. I bought a 5hp honda from a car boot sale years ago did the same, then replaced sensor and has ran OK for years. Would of thought the same on all Honda engines.
  5. woody paul
    Honda engine have oil level sensor they can play up. Maybe worth checking.
  6. woody paul
    Had a couple of bad patches on the hopper of mine, just cut out rot and welded new bit in. As said no problem for fabricator.
  7. woody paul
    Only parts available for jonesred saws are old stock, or you have got to use second hand. Jonesred 630 was a great saw of it's time logged tons of timber with one when I worked for someone,
  8. woody paul
    Get the odd person ask me about wood, and I am always happy for someone to take it.. Specially if it's willow.
  9. woody paul
    Then just cut it off with one cut, will make it easier next time.
  10. woody paul
    You need to find out from customer if it was do with MEWP which will answer your question
  11. woody paul
    I had similar troubles with a 362, turned out to be aly plate on clutch cover had got bent out when I cleaned it before re assemble. Got no idea what on clutch cover but it' may have a plastic chain guide attached by screw check that it's nor come loose.
  12. woody paul
    Here's a ford one
  13. woody paul
    There must of been loads of trees in the storm of 1987 not replaced. If you don't tell them they will never know what happened.
  14. woody paul
    Are you talking about hand or powered.
  15. woody paul
    All electric so must be a fuse or relay some where.
  16. woody paul
    Once you get it to fit take it off and stick it in with epoxy glue also it will take up any bad shaping.
  17. woody paul
    You could try your local agricultural dealer, or even a old blacksmith. Quickest way to put a handle in anything is by using a small angle grinder with a 80 grit flap wheel in. If you have time to do it yourself just take you time it's not hard.
  18. woody paul
    If you had of tied top of bag and strapped them on you could of been OK. I got told by a retired police officer if they can pull any thing off truck or even move it with little effort you will get ticket for it, then they may take a closer look at truck and find everything else that may be wrong with it, as why he asked why you hot logs on truck.
  19. woody paul
    Need to find one with large capacity chipper so just check for any metal and chuck them in.
  20. woody paul
    Good set of chains and good tractor and you can move it around.
  21. woody paul
    Is that 1 🦆
  22. woody paul
    Air wash cleans glass on doors and throughs heat out of stove more, open both and see if it smokes when door is opened.
  23. woody paul
    If you open damper and wait does it still smoke. Another thing is baffle plate the right way round.
  24. woody paul
    As you live in bungalow get on roof and check flue they tar up right at the top and no matter how much you sweep you can't dislodge it.
  25. woody paul
    That many trees is worth bringing in big kit as you say it can get in. Best way to hire any kit is by the week. As Mark said solo climb on them I would think again, unless you are going to top them with one or two cuts.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept