Jump to content

Log in or register to remove this advert

Old Mill Tree Care

Veteran Member
 View Profile  See their activity

  • Posts

    7,395

  • Joined

  • Last visited

 Content Type 

Everything posted by Old Mill Tree Care

  1. Old Mill Tree Care
    Arbrep Services at Alton, Hampshire.
  2. Old Mill Tree Care
    If they are now too close and they weren’t before, something very serious has changed! Bearing issue? Something worse?
  3. Old Mill Tree Care
    We still have a vacancy for a groundie........
  4. Old Mill Tree Care
    Sorry chaps. Yes Nepia is right, Edenbridge in Kent.
  5. Old Mill Tree Care
    Hopefully this can go to a good home: Access is good for any size vehicle. I haven’t measured it but truck is about 3.5-4ft diameter and 17ft tall. Plenty of thick straight stems and limbs above. I’ll be dismantling the tree in January or February and it’s ripe timber for milling or carving. If you’re interested PM, email or call me and I’ll send you some photos. Thanks Al 07834 414271 [email protected]
  6. Old Mill Tree Care
    I’m dismantling a large Oak tree in January or February and it’s ripe timber for milling or carving. Access is good for any size vehicle. I haven’t measured it but truck is about 3.5-4ft diameter and 17ft tall. Plenty of thick straight stems and limbs above. If you’re interested PM, email or call me and I’ll send you some photos. Thanks Al 07834 414271 [email protected]
  7. Old Mill Tree Care
    If you were finishing your course now and likes near me I’d give you a job tomorrow. IME (most) military people make very good Arb people. It’s the obvious work ethic and discipline along with the ability to keep the eyes/ears open and mouth shut in order to absorb information quickly. Sure you’ll do as well as you want to. [emoji1360][emoji1360]
  8. Old Mill Tree Care
    No I know that mate. It was a joke. Sorry.
  9. Old Mill Tree Care
    As above but make sure that the holes you make in the ear muffs are deep enough otherwise you’ll cut the wire when you put the ear cushions back in place. Like I didn’t, honest.
  10. Old Mill Tree Care
    Protos by Pfanner.
  11. Old Mill Tree Care
    I have a bit of Sirius that I want to get spliced onto a DMM Captain Hook. Can anyone do this?
  12. Old Mill Tree Care
    Hi sdullee I’m still waiting for your call. Thanks Al 07834414271
  13. Old Mill Tree Care
    Is there really no one looking for a job, anywhere at all is it just in the South East?
  14. Old Mill Tree Care
    Yes it is because it gets left in long grass instead of put away in the correct place so the real cost is a spanner nearly every day. [emoji23][emoji23][emoji23][emoji12][emoji12][emoji12][emoji12]
  15. Old Mill Tree Care
    That’s what I’d do if I had the kit to do it. Or the time. Or the patience. Or the talent[emoji23]
  16. Old Mill Tree Care
    And you have at least as much chance of getting hung up whilst descending and a branch goes up the back of you helmet. Buckle won’t open due to the pressure and you can’t ascend because you’re in a tight spot. Let’s face it, every aspect of everything we do creates some risk and presents a hazard [emoji849][emoji12]
  17. Old Mill Tree Care
    Thanks mate.
  18. Old Mill Tree Care
    Thanks Bob Yes it does appear to be an 11mm as I bought a 10, then a 12! [emoji849].
  19. Old Mill Tree Care
    The magnets are in the wrong place to satisfy the H&S freaks.
  20. Old Mill Tree Care
    Like many on here, I have a Stihl long reach hedge trimmer. The gearbox in the head must be greased regularly which means getting the tool to undo the stupid plug bolt then press my grease gun into the hole to administer the grease. This process is extremely irritating and would be so much easier if there was a grease nipple! I have ordered several different sizes of grease nipples online and none of them fit. Has anyone had success retrofitting theirs and if so, where did you find the nipples? I don't have this problem with any of my Echo hedge trimmers because they are a far superior tool in every single way. Even when something does break, which is never, Echo are excellent at dealing with warranties. Thanks.
  21. Old Mill Tree Care
    ‘twas was on an Oak, until the groundie stepped on it and it broke off [emoji849].
  22. Old Mill Tree Care
    I’ve found some gloves at Kidmans ‭01892 530771‬ which are excellent. I can’t remember the brand but it’s the only one they sell. Very good gel coverage.
  23. Old Mill Tree Care
    Before the Tree Officer turned up presumably. [emoji23][emoji23][emoji12][emoji12][emoji12]
  24. Old Mill Tree Care
    We carry out primarily domestic tree work. Our commercial client portfolio includes only the companies that I like to work for because the work is nice i.e: No high speed tree bashing. Most of our work is in the Reigate area and it's very rare to travel more than 20 minutes. Salary will be dictated by your abilities, not age or qualifications although relevant certification is preferred. You must have plenty of initiative, be adaptable and have the desire to do well and improve yourself. There is plenty of scope to advance within the company, if you want it. Please call me on 07834 414271 or [email protected]
  25. Old Mill Tree Care
    Apparently there are two mounting units available. The expensive option is the one you can get from the Arb shops. The cheaper one that is virtually the same is probably available from everywhere else.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.