jmac
-
Posts
406 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by jmac
-
I had the same happen to me when asked to sharpen a customer's chains for his firewood saw, chains were badly damaged from cutting the ground and were of unknown make, And were really really hard and new file did nothing. I put it down to work hardening but could have been the cheap chain.
-
The red rocket! ?
-
Nice one! And could you have made money if you'd done it for £1800?
-
Nice work Steve.
-
It certainly is! Mine is sitting in a heap with a blown head gasket, one of the many things I've had to fix on her in the last three years ( she has had a hard paper round ) the black bonnet one is older but looks to be in much better Nick than mine.
-
Are you eyeing that one up too? ?
-
Must be some tree with those prices!
-
Hope you gave Stevie a healthy discount? He must have helped sell a fair few cs 100 s with his wee chipper thread ???.
-
And haggis don't have a spine! ???
-
No it's Ben cruachan, the hollow mountain ?.
-
It's not a skull, looks like back of pheasant or similar bird.
-
Wee bit of blue sky here.
-
The blades are round. No option to put square blades on my 2009 machine. It's a great machine but because of their design they quite often get used or more like abused on railway and motorway embankment. Just need to pick the right machine.
-
It's on my list of things to do ?. There is a greenmech video showing the process, pretty handy. Wasn't a dig at greenmech about rollers and idler failure, I can't see past the greenmech safetrack 1928 now, goes almost anywhere and chips really well. Just wish I could have a nice new one.
-
A bit different on tracked machines as they have run for that long but not necessarily chipped for that long as can spend a fair amount of time just getting themselves to site, downside is a worn trackbase can become very expensive very quickly if your unlucky! Yes I'd agree with you there. I bought my safetrack nearly 3 years ago now with 1500hrs on the clock, had to rebuild one idler wheel and all the bottom rollers and put a new set of tracks on it! The guy said it had been on motorway embankment contract so prob done a few miles in it's life.
-
Yeah mine does the nose dive thing. Know a guy with a wee tracked jenson that has nearly 4000 hrs on and the actual chipper drum has started to wear out, he's had to weld patches on the thin bits! Still goes and chips really well because he looks after it.
-
A lot of chipper for the money but quite high hours imo. Read somewhere that 3000hrs is the lifespan of a chipper, what do others think about that?
-
Here is the foster grain trailer, very rusty!
-
I've just got a road tow compressor, it's not giant but produces plenty air. The blasting media is quite expensive right enough and a 25kg bag does not go very far !
-
It's proper blasting media I've got, iron silicate from scangrit. I think sand is a banned substance here ?. I used it years ago but it breaks down too easily and you get loads of dangerous dust!
-
I will be taking pictures of the spruce up ?.
-
The pressure pot looks like a good idea, don't think my spray gun holds more than 1ltr.
-
Am I right in thinking you don't need undercoat with rustoleum ?
-
Ha ha sorry Bob that ain't my company colour ?. What type of blue paint do you use?
-
I have finally got round to getting a couple of pallets of grit for the blaster, so it's time for the chieftain low loader and foster grain trailer to get spruced up ?. The foster has really bad surface rust (as most of them do) so could prob do with some high build primer first? What paint would you recommend and what supplier? Cheers.
