Jump to content

Log in or register to remove this advert

Matthew Storrs

Veteran Member
 View Profile  See their activity

  • Posts

    3,939

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Matthew Storrs

  1. Matthew Storrs
    And that includes a £40 fuel cap which I’d forgotten about. 1 machine service on its own was about £100 including labour/oils/travel
  2. Matthew Storrs
    Yeah- that’s rip off money. I have CBL saltash come to my yard to service 2 of my diggers, track motor oils, engine oil, fuel/ air and hydraulic filter. Total was £380 for both machine inc VAT and their travel time. Can’t grumble really just checks invoice £353 all INC.
  3. Matthew Storrs
    Why so low? My NI are 9% of my profit. Certainly isn’t £2.60 a week! ahh your talking about Class 2 contributions- not sure what the state pension entitlement are if your only paying class 2?
  4. Matthew Storrs
    You can still buy the 3.0l new, I got a quote recently for one. No way on earth I’d have a 1.9L engine pulling a 3 ton digger around Dartmoor on a daily basis! and then realised that a 2wd truck was just a non starter all round so abandoned the idea!
  5. Matthew Storrs
    As if the system doesn’t get exploited as it is- sounds like it will become even more messy!
  6. Matthew Storrs
    Ah I see, can’t see how on they’ll enforce that except on the big construction sites etc? What’s to stop your average tree surgeon sticking 20l of cherry in their chipper
  7. Matthew Storrs
    So I assume they’ll be coming around to sites dipping the tanks of Plant, or are they stopping red diesel and everyone uses white (inc farming etc) only they can reclaim the duty?
  8. Matthew Storrs
    I’m quite looking forward to a few weeks of pottering around the garden! Particularly if the sun comes out too! Got loads of personal projects I want to get on with and never find enough time- just got to make sure I get the materials in before the lockdown.
  9. Matthew Storrs
    Yes this is exactly it, and if you do landscaping/decking/fencing or whatever it also excellent for the same reasons- just need the odd cut here and there, no need to faff around with fuel and starting
  10. Matthew Storrs
    I had a funny one the other day with mine- wheel nut on a dump trailer,mechanic on the farm had a go with his top of the line Milwaukee 3/4” with full batteries (which is supposedly more torque too) it didn’t touch it, I quietly went off to get my Makita not expecting it to be any better- but it hardly even hesistated.
  11. Matthew Storrs
    ... and the Mak 3/4” impact wrench, strimmer, angle grinder, SDS drill, I have found them all to be very good tools.
  12. Matthew Storrs
    Even without the batteries being used for other stuff- bang for buck I’m well chuffed with mine, not the most powerful but no issues with 8” and below. Can do bigger but that’s when it starts to slow and use up battery. I’ve had mine for 2 years now and aside from a new chain havn’t had to touch in in regards maintenance etc
  13. Matthew Storrs
    Makita!!!! All the way!!!
  14. Matthew Storrs
    China seem to be doing a pretty good job of containing it there now- by locking down- stopping incoming flights, obviously the horse has bolted now, but the amount of new cases in China is very low. If its as serious as they make out (I’m slightly struggling to appreciate the severity of it that the media is referring to) then think we could be locking down a lot more than we are whilst we are at this low stage of infection- surely prevention is better than cure? perhaps viruses actually need to run their course to prevent them from manifesting into other strains.... no idea really
  15. Matthew Storrs
    I was kind of thing about it for cutting through concrete/tarmac for digging trenches. But not sure if it has much benefit over a road saw for that application... in fact think road saw could be better for long linear cuts, but chain saw better for fiddly stuff
  16. Matthew Storrs
    I’ve dug these few small ponds recently with a 3 tonner- it did it ok- there were some pretty massive boulder which I used to shore up the sides as they were tending to migrate into the water. One of them was filling up quicker than I could dig it! the last pic of the pond has sine been extended out laterally to make it less doughnut shaped.
  17. Matthew Storrs
    It looks much bigger than 20m square I must say.
  18. Matthew Storrs
    Why else do you buy bog roll!
  19. Matthew Storrs
    It’s hard work keeping up with the joneses isn’t it ?.
  20. Matthew Storrs
    Has anyone used one of these. How does it compare to a standard road saw- feel like it could be easier to use and more versatile- due to increased plunge depth- certainly the videos look good.
  21. Matthew Storrs
    Lock diff lock perhaps.
  22. Matthew Storrs
    Exactly my thoughts. The fact that everyone will be in the same boat will eliminate any ‘grey’ areas eligible for abuse.
  23. Matthew Storrs
    I think I get about 40k miles out of my BFG muds. Obviously fronts wear quicker than rears. I put a full set on and then when the fronts wore out I put the old rears on the front and put the new pair on the rear...
  24. Matthew Storrs
    I have BFGs mud terrains on my defender. Seem to last a long time, I find them perfectly acceptable for road use too and have never had any issues towing my 2.8t digger around on them. my theory is that if that little extra grip over ATs is what gets you out of a muddy field on a rainy Friday evening then I’d sooner that then a bit more road noise or whatever...
  25. Matthew Storrs
    Love Chris Rea, road to hell is his classic and rightfully so, but this one gets me everytime.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.