richy_B

Need to get a 12t machine low loadered from Hereford HR2 to London UB6. 130 Miles, 3-4 hours. Any recommendations? Be great to get a back leg, can be flexible on pickup days. Thanks, Rich.

Thats ideal - much appreciated. As has been said, it's highly unlikely but a utility company isn't going to take "I am sure it'll be fine"... With this I can give them the maths and assess/tick it off the RAMS.

That could be a solution, if there is indeed a problem. I'm just trying to find something to refer to at this stage. Can't find much via Google in terms of weight displacement on soils etc. Althought not entirely sure I'm phrasing my searches correctly.

I'm not really worried about it but the ultimate concern is collapsing a sewer that could cost vast amounts of money in emergency works should anything go wrong. Clearly it's very deep and as monkeybusiness says - forces will be dissipated quickly. 12 metres is 4 storeys so huge. I am just fishing for information to properly risk assess and mitigate. Anecdotal information although generally obvious/common sense is hard to use for large national clients. Trying to find some info I can reference.

Not the specific brand but seems a decent spec for the money. Hydraulic brakes only though. I have a veru similar Herbst 8t dropside and paid not a lot more from Agri lincs.

Yep, 12 metres deep and 100 metres up the track it is 22 metres deep to take into consideration the local terrain. It hasn't been dug since they built it in late 19th century so no idea on what's there but I'm assume it's mainly London clay. It is really deep and as you say cities are full of sewers - no where near as deep. I don't want to be the exception to collapse a massive sewer!

Hello, wasn't sure the best place to post this. In autumn I have a job working on a pond/vegetation project. All straightforward - to assist with reach we are going to use 8-10t excavator. An item has come up : there is a very large Victoria sewer that we have to cross. This sewer is said to be 9ft/2.5m diameter, brick built and 100 plus years old. It's part of the mains infrastructure and managed by Thames Water. The sewer is 12 metres below where we need to cross it. That seems huge and I'd imagine you'd need hundreds of tons to be a risk- but I'm not an engineer. Thames Water are reluctant to make an suggestion to its loading bearing for crossing it. I think we are all in agreement it seems highly unlikely but everyone is bit reluctant to be the one to make the call and put their name on it. If it did collapsed it would be a huge issue though as I'm told it serves 5000+ homes. And again its 12 metres below ground... I was wondering about making some sort of basic bridge. Some trakmats a couple of metres either side of the sewer and maybe some beams or something - so basically at no point are we putting direct downward pressure on it. Hoping this might alleviate clients concerns. Any thoughts? Am I massively overthinking it? (feel like i am, but not a bad thing).

I'll have to get the serial Monday. It is a 2008 model so assume its a mach 1.

Thanks Gareth, any suggestions for this? I am told there any sharper hammers but is the auxiliary fan an option?

That's is exactly what it needs! I'll check in with them.

Generally it is a great machine, on all our hedge cutting and old tree stakes it throws it fine. Bundles of small lime branches in full leaf is so fibrous.

As in a 2nd fan or changing original? I changed the original about a year ago as the previous owner had bent a fin. I had hope this would help but not much.

I have a road tow timberwolf S426. On basal and epicormic pruning of Limes (It's main job) its regularly struggles to throw the material far enough into the tipper. Its mainly when there is a big bundle of branches and the engine speed drops a bit. Drops it literally 1.5-2m from the chute to where it lands. This is annoying! I wondered about reducing the feed speed - there isnt any adjustment as standard. Any thoughts on how I might achieve this? The 2nd thought is change the hammers for sharper vegetation focus ones (standard are more for bludgeoning than cutting).

I built some bolt on greedy boards for my transit a few years back. Only basic but I found working with the ally planks was a treat - easy to drill, cut and rivet. Service metals also cut the planks to length for me and were spot on. Perhaps amateur sounding but I just put a bit of duct tape where steel met ally. 3 years on and no issues at all. Good luck the build.

I have this with my tracked nifty lift. Occasional foaming in hydraulic tank. Really hard to work out as its is hugely intermittent - only happens when tracking (or legs up) but you can track 1000 metres and is it fine, then another time track 10 metres and it does it. Turn it off, give it 30 seconds and go about and its fine for hours.

I think you're right. They are going to have a massive hit. Despite this they won't scrap ULEZ, just kick it down the field. 2 or 3 years is my guess for ULEZ expansion. The LEZ increased criteria is much easier, no infrastructure changes - just the number plates.

Might be able to get a space on a return leg. Masses of HGV traffic up Dover then round and up the M1 still.

ULEZ london is topical to me as I'll be 'engulfed' by it when it expands. There is a decent scrappage scheme for vans upto 3500kg as well as cars - I have used it for one of my vehicles and well as buying a euro6 7.5t tipper. Worth looking into if the ULEZ impacts you. The only thing that will delay ULEZ is COVID19 and TFL's ability to get all the cameras and infrastructure built. I reckon it'll be 2022 or 2023. Something a lot of people don't seem to be aware of is the higher standards the LEZ (so everywhere inside the M25) change to October this year. Additionally the LEZ and ULEZ will apply to engineering plant as well; so 3cx, cranes, vehicle mounted Mewps etc. Far less exemptions from October 2020.

True. I was looking at agri registering a machine this week and the govt 'helpline' said if you weren't a professional HGV driver/haulier they weren't taking applications. Literally shut up shop.

Yes but you tow a trailer then you aren't exempt anymore. From my understanding anyway, happy to bw wrong! So a 7.5t pulling a >750kg trailer (I tow my Multione which is 2750kg with its trailer and bits).

This is exactly what I thought but after I was granted it I thought I missed a trick not applying for two. It'll be another grand for fees and advertising if you want to change inside 5 years.

I am new to O licenses and did not know this. I have been reading up on it all as the entire point of my O license was to get everything 'above board' and not risk overloading (I wasn't terrible but so easy done in a transit - also train weight issues). There is a fair amount to learn I have found compared to just running 3.5t's. This week a skip driver told me he got done for not having 3 spare tacho rolls with him - literally the first time I had heard this as well.

Having done my O license in the last year something I'd say is apply for as many trucks and trailers as you can. I didn't really think it through and just applied for 1 truck. If I want to add anymore in the next 5 years it is a whole new application. Obviously dont go crazy but if you are thinking of getting one truck maybe apply for 2.

They've sped up the promo video. Instantly dubious about the product!

Not asking specifics but I assume that's small house money!