Jump to content

Log in or register to remove this advert

Will Hinchliffe

Veteran Member
  • Posts

    1,215
  • Joined

  • Last visited

Everything posted by Will Hinchliffe

  1. Yea one of my favourites. Stourhead have a mature one that is really beautiful.
  2. We use Plantoil. No problems with it making a mess but the oiling hole on the bars of the 371 and 372 seem to get clogged a bit to frequently.
  3. I know, outrageous isn't it.
  4. We run our 395 on 404 chain. It seems to cope with it fine.
  5. A contractor on the longleat estate had his timberjack stollen from the woods a couple of months ago:thumbdown:
  6. Without the knot its a klemheist like Rich says. With the knott it is similar to a helical hitch but tied with a dynama sling. Hitches tied with slings as shown in your picture are only suitible for ascent and will burn through if you descend on them. Rock climbers use them for emergancy ascents. Friction hitch cord is much more durable and more suitable for tree work.
  7. Usually he ties it longer but it was making his hitch slip a bit that day. I keep telling him that he needs a spliced eye. We even have spare ropes with spliced eyes sitting around but I think he wants to get his moneys worth out of his blue rope first. I bet its quite scary pushing a tree over like that Alopa.
  8. Nice one:thumbup: Would like to give that a go. 24 seconds sounds fast.
  9. You certainly have to keep an eye on your hitch with the hitch climber. I Tie a Vt but have it quite long so that it dos not interfere with the top carabiner. I wouldn't switch the top carabiner to the middle hole keep it in the top hole this holds the hitchclimber pully at a better angle.
  10. We raked it out and put in builders sacks then hauled it through the windows in the wall. We also got EA permission for the stump treatment.
  11. A few pics from the last 2 weeks. Jon, Bat surveying with an endoscope in Bath. Some clearance work in Bradford on avon. Fixing a net in the flamingo Avery at Longleat and Kieran up an Ash.
  12. I didnt really explain it very well to start with. I guess you could clip on a static line and srt up it, but you would want to make sure the hitch had set nice an tight.
  13. You just use one rope, its tied in one big loop (eye splice to the top caribeener and other end in a bowline to the bottom caribeaner). If both ends touch the ground at the beginning you cant run out of rope.
  14. 5. A soft lock on a figure of 8. Move the lower two ropes over the top of the large ring then trap it between the rope and the ring. I look forward to seeing some more photos from other people.
  15. 4. When at the top of the tree and trying to throw the rope higher it will sometimes keep self tending due to the weight of the rope below. To stop this tie a slip knot (Marline spike) above the hitch.
  16. Thats a good idea with the crab. There is no need to pull it all up tight to the branch you could just haul it half way up if thats how high you need to go. You cant run out of rope Steve.
  17. 3. Re routing your system with a hitch climber. Tie a slip knot bellow the pulley and clip the oval caribeaner into it then pull the tail end to pull the system through the fork.
  18. I dont think its possible to do it with a rope that is to short.
  19. 2. Using an alpine butterfly to use a lanyard with a cinch an a single line configuration. I tie my alpine butterfly by forming a slip knot first then putting a half hitch over the slipped loop.
  20. Anyone got any photos of techniques they use or have tried? I tried to take some today, mostly simple things that most people will know but hopefully a few people will find them useful. 1. An interesting way to set a footlock acces line. I saw this technique on an American forum and have tested it out at work. You must haul the system up to a position that you can strop in and still reach your Vt.
  21. Lovely place to live:thumbup1:
  22. The Scots pine is showing reiteration. Its a great example of it. Sorry I didnt get to chat to you or TCD for long.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.