Jump to content

Log in or register to remove this advert

Best Strimmer Line


matt_uk
 Share

Recommended Posts

It's been a couple years since the last comment.... what's your user reviews after lots of use?

 

Portek Power Strim fixed head vs Oregon Jet

 

Also, what's the best line to use in either of those? Just for cutting grass....

cheers, Steve

Hi Steve I wouldn't say I'm the best qualified to offer you advice but in the absence of better here's my thoughts.

We use a Oregon jet cut at work but one port doesn't grip small line very well. Still ok for over 3mm and still another pair we can use but it's not done a huge amount of work. Might be a one off but it does suggest a weakness with small lines. I would say the Oregon has a more swept holder so easier on the line if you are into the really heavy stuff with a powerful machine.

My own Portek head needed the thread on the aluminium disc refixing with loctite as it came unscrewed when changing line. Was really tight though as it had been strimming sheep net.

My conclusion from my limited use would be if you are using big line in a head for heavy work on a 2kw plus machine go for the Oregon jet. Smaller line on smaller machine then perhaps the Portek.

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Hi Steve I wouldn't say I'm the best qualified to offer you advice but in the absence of better here's my thoughts.

We use a Oregon jet cut at work but one port doesn't grip small line very well. Still ok for over 3mm and still another pair we can use but it's not done a huge amount of work. Might be a one off but it does suggest a weakness with small lines. I would say the Oregon has a more swept holder so easier on the line if you are into the really heavy stuff with a powerful machine.

My own Portek head needed the thread on the aluminium disc refixing with loctite as it came unscrewed when changing line. Was really tight though as it had been strimming sheep net.

My conclusion from my limited use would be if you are using big line in a head for heavy work on a 2kw plus machine go for the Oregon jet. Smaller line on smaller machine then perhaps the Portek.

 

Great thanks. Our Florabest is about 1.35kw (43cc ish). I guess it may be best to keep the line below 3mm for that.

cheers, steve

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

I'm in the market for some new strimmer line and came across this old thread, its got lots of interesting information and has got me questioning my current set up...

I use a fs94rce for everyday use with 2.4mm stihl line for round lawns etc.

 

I've also got a fs100 which is used for large grass areas and churchyards, round graves etc and even wildflower meadows at the end of the season. Which at the moment i only use a autocut head and the 2.4mm line in.

But i'm thinking of changing this set up, maybe to an oregon jet fit or portek head? Now what size cord should i be using for my size of machine? and which head would suit that cord best?

 

Thanks in advance, James.

Link to comment
Share on other sites

I'm in the market for some new strimmer line and came across this old thread, its got lots of interesting information and has got me questioning my current set up...

I use a fs94rce for everyday use with 2.4mm stihl line for round lawns etc.

 

I've also got a fs100 which is used for large grass areas and churchyards, round graves etc and even wildflower meadows at the end of the season. Which at the moment i only use a autocut head and the 2.4mm line in.

But i'm thinking of changing this set up, maybe to an oregon jet fit or portek head? Now what size cord should i be using for my size of machine? and which head would suit that cord best?

 

Thanks in advance, James.

 

What cc is it ? My Husqvarna 545RX is 45cc and drives the Diamond Edge 4.00mm square .

Link to comment
Share on other sites

I'm in the market for some new strimmer line and came across this old thread, its got lots of interesting information and has got me questioning my current set up...

I use a fs94rce for everyday use with 2.4mm stihl line for round lawns etc.

 

I've also got a fs100 which is used for large grass areas and churchyards, round graves etc and even wildflower meadows at the end of the season. Which at the moment i only use a autocut head and the 2.4mm line in.

But i'm thinking of changing this set up, maybe to an oregon jet fit or portek head? Now what size cord should i be using for my size of machine? and which head would suit that cord best?

 

Thanks in advance, James.

 

What cc is it ? My Husqvarna 545RX is 45cc and drives the Diamond Edge 4.00mm square with no guard and longer lengths .

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.