Which Grease Gun?

[Sandworks]

Riener system, no going back to messy style grease cartridges now

SYSTEM REINER - FUCHS LUBRITECH GmbH

 

As above,but even the adaptor on those can give gyp!

But the pumping end is faultless,they are great on track tensioning in the field…. and freeing out pin bush nipples:thumbup:

[Stephen Blair]

Old ones that have no names that I don't even know where I got them from are bullet proof.

The fancy 1 handed 1 that cost £30 is a pain, always pumps fresh air and end gets stuck making me take tantrums!

Hope that helps

Ps I hate grease!

 

 

Sent from my iPhone using Arbtalk

[codlasher]

My 360's tool bin housed a 3'' thick layer of grease from leaking grease guns. The only positive from this is that it hasn't rusted! Biggest downside was the tools all had a layer too so you were instantly covered even for the smallest job. I've binned that self emptying grease gun and have another, cartridge one, that seems to be a little cleaner.

The biggest problem I have found is the seals are not compatible with grease so don't fit well plus the tube is always under pressure and this results in constant slight leakage.

codlasher

[dent]

the best are supposedly alemite and lincoln there about £50 but the chucks dont have to be held on to the nipple and they dont pump air

lincoln make them for the likes of cat new holland john deere and snapon

[slack ma girdle]

I have had a 'lube shuttle' screw in cartridge grease gun for ten years, it has been faultless and not expensive.

[NFG]

Hi,

 

I bought a Wanner grease gun about 25 maybe even 30 years ago, works same as the day I first filled it up.

 

N

[Breezeblock]

sometimes its not the grease guns that are at fault if you store grease guns and tubes on end it makes a difference as the air ends up away from the piston end

[woodworm]

Riener system, no going back to messy style grease cartridges now

SYSTEM REINER - FUCHS LUBRITECH GmbH

 

 

Yes Yes Yes Yes Yes Yes Yes Yes Yes. The best grease gun I have used in 30 years of working in farming and forestry. Larger grease tubes, no mess, just screw it on and start pumping. Have even run over it and the only damage was the grease tube, Just put a new one on and away it went. Fantastic. Deere forestry had them on there stand at Elmia 2009 but dont know whether they carried on selling them but we get ours from Fuchs anyway.

[Joel77]

Once you used one of these you won't bother with a normal one again !!!!

 

CPG18V SEALEY CORDLESS GREASE GUN 18V [Grease Guns Cordless Power Tools] NEW! | eBay

[Ian C]

Once you used one of these you won't bother with a normal one again !!!!

 

CPG18V SEALEY CORDLESS GREASE GUN 18V [Grease Guns Cordless Power Tools] NEW! | eBay

 

Oh yes I would, 120 quid for a grease gun just so you dont have a lever to pump.......:eek:

 

Sent from my GT-I9300 using Arbtalk mobile app